儀器產品列表

點我放大

3S® Total Chain

• Cat#3S11002
• Security: integriry of each sample
• Total traceability
• Flexibility: automatic or manual
• Applicable to all types of liquid biological samples
• DataMatrix reader
• The Safe Sampling Key
• Safe Sampling Transfer Tube
• 8 color code

點我放大

SpectraMax® Paradigm®

• Cartridge designing including Multi-Mode, Abs, FI, FI Dual, Lumi, Dual-Color Lumi, TRF, FP and TUNE Cartridge
• Support Cisbio Bioassays’ HTRF, AlphaScreen and GeneBLAzer® assay
• PathCheck® Technology for sample depth
• Top or Bottom-read
• PMT providing the maximum signal and lowest background for Fluorescence
• 4 protocol: endpoint, kinetic, well area and Wavelength scanning
• Formats: 6-1536 wells
• Shaker time: Linear, Orbital
• Temp. control: +4°C ~ 45°C
• W x D x H (cm): 39 x 63 x 45

點我放大

SpectraMax® M5e

• Dual monochromatic optics allows Abs, FI, Lumi, TRF, FP
• Support Cisbio Bioassays’ HTRF assay
• PathCheck® Technology
• Top or Bottom-read
• PMT providing the maximum signal and lowest background for Fluorescence
• 4 protocol: Endpoint, Kinetic, Spectral Scanning, Well Scanning
• Wavelength range:
200-1000 nm
• EX/EM: 250-850 nm
• Formats: Cuvettes,
6 - 384 wells
• Shaker time: 0 to 999s
• Temp. control: +2°C~60°C
• WxDxH(cm): 58 x 39 x 22

點我放大

AQ-07 Nucleic Acid Meter

• Cat#007AS001
• Wavelengths: 260 and 280nm
• Photometric measuring range: 0.001 to 4.30 OD
• Method-dependent evaluation:
–Purity via 260/280nm ratio
–ssDNA via 260nm
–dsDNA via 260 nm
–RNA via 260 nm
–Protein via 280nm
• Computer interface: USB
• WxLxH: 3.5 x 7 x 3 inch

點我放大

CoolCell -12vial

• Cat#BCS-136
• Alcohol-free
• -1°C/minute cell freezing container
• 12 x 1 or 2ml cryo vial
• Diam x H: 12 x 11
• Weight: 0.5kg

點我放大

CoolSink 96F

• Cat#BCS-106
• 96 well flat-bottom plates
• WxLxH: 13.2 x 8.9 x 1.8 cm
• Weight: 0.8 kg

點我放大

SpectraMax i3

• MiniMax Image Cytometer Option
• Lastest SoftMax Pro with MetaMorph image process core
• Three Basic Detection Modes for Abs, FI and Lum
• Cartridge designing including Multi-Mode, Abs, FI, FI Dual, Lumi, Dual-Color Lumi, TRF, FP and TUNE Cartridge
• Support Cisbio Bioassays’ HTRF, AlphaScreen and GeneBLAzer® assay
• Spectral Fusion Illumination
• Expanded Dynamic Range
• Monochromators for optimal EX/EM
• PathCheck® Technology
• Both Top and Bottom-read
• Wavelength range:
230-1000 nm
• EX/EM: 250-850 nm/
250-850 nm
• Formats: 6 - 1536 wells
• Shaker time: 0 to 999s
• Temp. control:+4°C~45°C

點我放大

FlexStation® 3

• FlexStation® 3 features Abs, FI, Lumi, TRF, FP
• Support Cisbio Bioassays’ HTRF assay  
• PathCheck® Technology
• Top or Bottom-read can be to increase stability of FI, TRF and FP
• PMT providing the maximum signal and lowest background for Fluorescence
• Integrated 8- or 16-channel pipettor, can provide automate mixing and dosing
• 4 protocol: Endpoint, Kinetic, Spectral Scanning, Well Scanning
• 8-channel Max. volume:200 μL
• 16-channel Max. volume:30 μL
• Wavelength range:
200-1000 nm
• EX/EM: 250-850 nm
• Formats: 6 - 384 wells
• Shaker time: 0 to 999s
• Temp. control:+2°C~45°C
• WxDxH(cm): 58 x 49 x 40

點我放大

SpectraMax® Paradigm®

• Cartridge designing including Multi-Mode, Abs, FI, FI Dual, Lumi, Dual-Color Lumi, TRF, FP and TUNE Cartridge
• Support Cisbio Bioassays’ HTRF, AlphaScreen and GeneBLAzer® assay
• PathCheck® Technology for sample depth
• Top or Bottom-read
• PMT providing the maximum signal and lowest background for Fluorescence
• 4 protocol: endpoint, kinetic, well area and Wavelength scanning
• Formats: 6-1536 wells
• Shaker time: Linear, Orbital
• Temp. control: +4°C ~ 45°C
• W x D x H (cm): 39 x 63 x 45

點我放大

SpectraMax® M5e

• Dual monochromatic optics allows Abs, FI, Lumi, TRF, FP
• Support Cisbio Bioassays’ HTRF assay  
• PathCheck® Technology
• Top or Bottom-read
• PMT providing the maximum signal and lowest background for Fluorescence
• 4 protocol: Endpoint, Kinetic, Spectral Scanning, Well Scanning
• Wavelength range:
200-1000 nm
• EX/EM: 250-850 nm
• Formats: Cuvettes,
6 - 384 wells
• Shaker time: 0 to 999s
• Temp. control: +2°C~60°C
• WxDxH(cm): 58 x 39 x 22

點我放大

SpectraMax® M5

• Dual monochromatic optics allows Abs, FI, Lumi, TRF and FP
• PathCheck® Technology
• Top or Bottom-read
• PMT providing the maximum signal and lowest background for Fluorescence
• 4 protocol: Endpoint, Kinetic, Spectral Scanning, Well Scanning
• Wavelength range:
200-1000 nm
• EX/EM: 250-850 nm
• Formats: Cuvettes,
6 - 384 wells
• Shaker time: 0 to 999s
• Temp. control:+2°C~60°C
• WxDxH(cm): 58 x 39 x 22

點我放大

SpectraMax® M4

• Dual monochromatic optics allows Abs, FI, Lumi and TRF
• PathCheck® Technology
• Top or Bottom-read
• PMT providing the maximum signal and lowest background for Fluorescence
• 4 protocol: Endpoint, Kinetic, Spectral Scanning, Well Scanning
• Wavelength range:
200-1000 nm
• EX/EM: 250-850 nm
• Formats: Cuvettes,
6 - 384 wells
• Shaker time: 0 to 999s
• Temp. control:+2°C~60°C
• WxDxH(cm): 58 x 39 x 22

點我放大

SpectraMax® M3

• Dual monochromatic optics allows Abs, FI and Lumi
• PathCheck® Technology
• Top or Bottom-read
• PMT providing the maximum signal and lowest background for Fluorescence
• 4 protocol: Endpoint, Kinetic, Spectral Scanning, Well Scanning
• Wavelength range:
200-1000 nm
• EX/EM: 250-850 nm
• Formats: Cuvettes,
6 - 384 wells
• Shaker time: 0 to 999s
• Temp. control:+2°C~60°C
• WxDxH(cm): 58 x 39 x 22

點我放大

SpectraMax® M2e

• Dual Detection Modes for Abs and FI
• Dual monochromators for optimal EX/EM
• PathCheck® Technology
• Both Top and Bottom-read
• Wavelength range:
200-1000 nm
• EX/EM: 250-850 nm/
250-850 nm
• Formats: Cuvettes,
6 - 384 wells
• Shaker time: 0 to 999s
• Temp. control:+4°C~45°C
• WxDxH(cm): 58 x 38 x 22

點我放大

SpectraMax® M2

• Dual Detection Modes for Abs and FI
• Dual monochromators for optimal EX/EM
• PathCheck® Technology
• Wavelength range:
200-1000 nm
• EX/EM: 250-850 nm/ 360-850 nm
• Formats: Cuvettes,
6 - 384 wells
• Shaker time: 0 to 999s
• Temp. control:+4°C~45°C
• WxDxH(cm): 58 x 38 x 22

點我放大

FilterMax™ F5

• FilterMax F5 features visible Abs, FI and Lumi, TRF, FP 
• PathCheck® Technology
• Top or Bottom-read
• PMT providing the maximum signal and lowest background for Fluorescence
• 5 protocol: endpoint, kinetic, multiple wavelength, linear scan and area scan
• Wavelength range:
230-650 nm
• EX/EM: 230-750 nm
• Formats: 96-384 wells
• Shaker time: 0 to 999s
• Temp. control:+4°C~45°C
• WxDxH(cm): 58 x 39 x 22

點我放大

FilterMax™ F3

• FilterMax F3 features visible Abs, FI and Lumi
• PathCheck® Technology
• PMT providing the maximum signal and lowest background for Fluorescence
• 5 protocol: endpoint, kinetic, multiple wavelength, linear scan and area scan
• Wavelength range:
340-650 nm
• EX/EM: 340-650 nm
• Formats: 96-384 wells
• Shaker time: 0 to 999s
• WxDxH(cm): 58 x 39 x 24

點我放大

SpectraMax190

• Tunable (UV/visible 190-850 nm)
• Endpoint, kinetics, spectrum scanning
• PathCheck®,96-well

點我放大

SpectraMax® Plus384

Tunable (UV/visible 190-1000 nm)
endpoint, kinetics, spectrum scanning, PathCheck®,
384-well and cuvette port

點我放大

Gemini EM

Tunable (250-850 nm), fl uorescence, topand
bottom-read, cell-based assay, FRET

點我放大

Gemini XPS

Tunable (250-850 nm Ex, 360-850 nm Em),
fl uorescence, top-read

點我放大

SpectraMax® L

Up to 6-times faster, > 9 orders of dynamic
range, dual injection in both 96- and 384-well
microplates, excellent sensitivity, Autorinse
injectors, optional BRET confi guration

點我放大

AquaMax® Microplate Washers

● Self-contained
● Automatic washers with interchangeable 96- and 384-well wash heads
● 96 and 384 microplate wash and cell washing,
● Up to 4 fluid inputs
● Automated shutdown options
● “One Touch” priming
● Cleaning protocols

點我放大

MultiWash III Microplate Washer

● Low-cost 96-well microplate strip washer
● User-changeable wash manifolds

點我放大

Easy Drop

• Cat#0047001
• Transfer blood to tubes or other containers.
• No messy instruments
• Protect workers during disease diagnosis
• Precision: 18μl +/- 1 μl

點我放大

DATA MATRIX & FRID READER

• Cat#ICE49-81154
• Datamatrix Reader for Ice Tubes

點我放大

DataMatrix Reader

• Cat#3S20010
• Datamatrix Reader for Ice Tubes

點我放大

ICE Scanner

• Cat#ICE49-81410
• PACKAGING 1 UNIT / Format 81 or 48

點我放大

48 ICE Tubes with DataMatrix & Lamelle de Janin

• Cat#ICE49-48010
• All identification is made using the DataMatrix or the RFID chip
• «Lamelle de Janin», a small stick into the cryotube can easy place the tissues
• PACKAGING UNITS: 576/4608 ICE Tubes
• 3 types
Clean room
STERILE
STERILE/DNase FREE

點我放大

48 ICE Tubes with DataMatrix

• Cat#ICE49-48000
• All identification is made using the DataMatrix or the RFID chip
• PACKAGING UNITS:576/4608 ICE Tubes
• 3 types
Clean room
STERILE
STERILE/DNase FREE

點我放大

81 ICE Tubes with DataMatrix & Lamelle de Janin

• Cat#ICE49-81015
• All identification is made using the DataMatrix or the RFID chip
• «Lamelle de Janin», a small stick into the cryotube can easy place the tissues
• PACKAGING UNITS: 324/1944 ICE Tubes
• 3 types
Clean room
STERILE
STERILE/DNase FREE

點我放大

81 ICE Tubes with DataMatrix

• Cat#ICE49-81005
• All identification is made using the DataMatrix or the RFID chip
• PACKAGING UNITS:324/1944 ICE Tubes
• 3 types
Clean room
STERILE
STERILE/DNase FREE

點我放大

81 ICE Tubes without DataMatrix

• Cat#ICE49-81100
• PACKAGING UNITS:81F/500F
• Sealing O ring
• Protection sleeve
• 3 types
Clean room
STERILE
STERILE/DNase FREE

點我放大

Storage Module ICE Boxes

• Cat#ICE49-48200
• Storage Module for ICE Boxes -80°C
• for 48 Format ICE Tubes
• Storage module: 44 Units

點我放大

Colour Code

• Cat#ICE49-48154
• For ICE Tubes 250 units
• 48 FORMAT ICE Tubes
• WHITE/BLACK/BLUE/RED/YELLOW /ORANGE/PURPLE/GREEN

點我放大

RFID TAGS

• Cat#ICE49-00300
• Insulated RFID Tag for Cryotubes
• PACKAGING UNITS: 48/81/500 Units

點我放大

SSTS SOFTWARE

• Cat#3S14-500
• Backbone of the 3S® system
• secure database
• secure traceability of the samples.

點我放大

3S® Total Chain

• Cat#3S11002
• Security: integriry of each sample
• Total traceability
• Flexibility: automatic or manual
• Applicable to all types of liquid biological samples
• DataMatrix reader
• The Safe Sampling Key
• Safe Sampling Transfer Tube
• 8 color code

點我放大

SSP with DataMaxtrix

• Cat#3S48-09100
• PACKAGING UNITS:8/64/1280
• Size:2.8 x 8.5cm x 2.8cm
• Space saveing
• Contain 48 well
• With barcode
• Each well has datamatrix
• Volume : 500 μl per well
• Can add color tab and RFID

點我放大

SSP without DataMatrix

• Cat#3S48-09102
• PACKAGING UNITS:8/64/1280
• Size:2.8 x 8.5cm x 2.8cm
• Space saveing
• Contain 48 well
• With barcode
• Volume : 500 μl per well
• Can add color tab and RFID

點我放大

SSP® Keys

• Cat#3S48-09115
• Without effort
• Without risk of contamination

點我放大

Color code tabs

• Cat#3s48-09140
• Colour codes with IMATag (RFID)
• 8 colors

點我放大

BluePower™ 200x4 Power Supply

• Cat#BP-3000X4
• It is suited for applications requiring high current.
• It is compatible with separation of nucleic acids.
• 4 x 2 outlets, programmable.
• 2 types BluePower™:

BP-1500X4:1500V,400mA,300W
BP-3000X4:3000V,200mA,300W

點我放大

BlueFlash

• Cat#BF-S
• Semi-dry blotting system
• Fast and efficient transfer of nucleic acids and proteins.
• Safety lid, including design to prevent short-circuit
• Power supply: 200 V, 500 mA
• 4 type format
Small: 23 x 15 x 8.3 cm
Medium: 28 x 20 x 8.3 cm
Large: 45 x 33 x 8.3 cm
X-Large: 43 x 37 x 8.3 cm
XX-Large: 51 x 43 x 8.3 cm

點我放大

UV-Table C II

• Cat#UV-CII
• Wavelength: 312 nm
• Filter size of 22 x 28 cm.
• Suitable for digital image analysis
• Has removable adjustable UV protection shield
• Can combine with the SERVA Digital Imaging and Analysis System II (DIAS-II).

點我放大

Digital Imaging and Analysis System II (DIAS-II)

• Cat#DIAS-II
• Darkroom cabinet (40 x 50 x 40 cm)
• UV filter & filter holder
• Digital Camera (Canon)
• GelScan 6.0 1D Analysis Software
• GelScript 1.1 Software (Annotation of gel images)

點我放大

VIS Gel Scanner

• Cat#BIO-5000
• For 1D and 2D electrophoresis image analysis.
• Scanning Modes: Color(48 bit); grayscale(16 bit)
• Resolution: 4800 x 9600 dpi
• Dimension  L x W x H: 567 x 385 x 158 mm
• Weight : 12 kg

點我放大

Mini Orbital Shaker

• Cat#PR250
• Quiet instrument
• Digital LED display, easy programming
• Variable speed 50 to 250 rpm
• Cold room compatible
• Flat platform
• 99 hour 59 minutes timer with audible end of run alert
• Capable of continuous run
• Universal voltage

點我放大

Rocking Table

• Cat#KICK II
• Large size incubation platform (45 x 30 cm)
• Lifting frequency: 10 - 100/min

點我放大

BlueHorizon™ Super Cool Flatbed System

• Cat#BH-2C
• Gel format: 260 x 170 mm
• Suitable for 0.15; 0.3; 1.0 mm gels
• High capacity cooling plate suitable for high voltage IEF
• Electrodes has long life time, warranty up to 3 years
• Dual and triple electrode applications

點我放大

BlueVertical™ Mini Slab Gel System

• Cat#BV 104 Syst
• Gel format:8x10 or 10x10 cm.
• Suitable for SDS-PAGE, IEF and native PAGE 
• Contains leak-freeing system, 2 combs (10 samples, 1.0 mm), 2 sets of spacer (0.75 mm), 2 sets of glass plates, 1 dummy plate, user manual. 

點我放大

HPE-Tower system

• Cat#HPE-TS1
• Consists four horizontal electrophoresis chambers as movable drawers
• With an external power supply and a thermostatic circulater.
• Protected from light during the run. 
• Inbuilt pump for optimum cooling water flow through the plates. 

點我放大

Complete Separation Tank

• Cat#SE900
• For 2-D separations up to six 28 cm SDS-PAGE gels.
• Simple to use and provides efficient cooling
• Up to six 28 cm plates can be run at one time
• Hinged glass cassettes, rapid and easy assembly before use
• Has built-in draining port
• Includes separation tank, gel rack, six 28 x 21 cm hinged glass cassettes

點我放大

BlueMarine

• Cat#BM100
• Gel format: 7 x 10 cm
• Maximum voltage: 300 V
• Maximum current: 200 mA
• Gel volume (5 mm gel): 35 ml
• Maximum samples: 28
• Electrode separation: 18 cm
• Volts per cm: 14-140 V
• Contains 1 removable UV transparent gel tray (7 x 10 cm), 2 gel gates, 1 comb (1.0 mm, 8 samples).

點我放大

BlueMarine

• Cat#BM200
• Gel formats: 15 x 15 cm/15 x 20 cm
• Maximum voltage: 500 V
• Maximum current: 300 mA
• Gel volume (5 mm gel): 115 ml/150 ml
• Maximum samples: 62/124
• Electrode separation: 28.5 cm
• Volts per cm: 20-200 V
• Contains 1 removable UV transparent gel tray (15 x 20 cm/15 x 15 cm), 2 gel gates, 2 combs (1.0 mm, 16 samples).

點我放大

BlueMarine

• Cat#BM HTS
• Gel format: 17.5 cm x 19.2 cm
• For single samples or 96-well microtiter plates.
• Maximum voltage: 500 V
• Maximum current: 300 mA
• Gel volume (5 mm gel): 160 ml
• Maximum samples: 102
• Electrode separation: 28.5 cm
• Volts per cm: 20-200 V
• Contains 1 removable UV transparent gel tray, 2 aluminum gel gates, 6 aluminum combs with 17 sample wells.

點我放大

CoolCell -12vial

• Cat#BCS-405
• Alcohol-free
• -1°C/minute cell freezing container
• 12 x 1 or 2ml cryo vial
• Diam x H:11.7 x 10.9
• Weight: 0.5kg

點我放大

CoolCell FTS30

• Cat#BCS-170
• Alcohol-free
• -1°C/minute cell freezing container
• 30 x 1 or 2ml cryo vial
• Diam x H:16.5 x 11.4
• Weight: 0.5kg

點我放大

CoolCell SV10

• Cat#BCS-262
• Alcohol-free
• -1°C/minute cell freezing container
• 6 x 2ml serum vials
• Diam x H:12.1 x 9.8
• Weight: 0.5kg

點我放大

CoolCell® 5ml

• Cat#BCS-406
• Alcohol-free
• -1°C/minute cell freezing container
• 12 x 5ml cryo vials
• Diam x H:9.5 x 14.5
• Weight: 0.7kg

點我放大

CoolCell® SV2

• Cat#BCS-172
• Alcohol-free
• -1°C/minute cell freezing container
• 12 x 2ml serum vials
• Diam x H : 11.7 x 10.9 cm
• Weight: 0.5 kg

點我放大

CoolBox 30 System

• Cat#BCS-130
• With lid, blue +2˚C cartridge, red stage, insulator pad.
• 30 x 1 or 2ml cryo vial
• WxLxH: 16.5 x 15.3 x 12.7 cm
• Weight: 1.5 lbs

點我放大

CoolBox M30 System

• Cat#BCS-133
• With lid, blue +2˚C cartridge, red stage, insulator pad.
• 30 x 1.5 ml eppendorf
• WxLxH: 16.5 x 15.3 x 12.7 cm
• Weight: 3.5 lbs

點我放大

CoolBox M30-PF System

• Cat#BCS-134
• With lid, blue +2˚C cartridge, red stage, insulator pad.
• 30 x 1.5ml eppendorf
• WxLxH: 16.5 x 15.3 x 12.7 cm
• Weight: 1.9 kg

點我放大

CoolBox CF30 System

• Cat#BCS-135
• With lid, blue +2˚C cartridge, red stage, insulator pad.
• 30 x cryo vial or flow tube
• WxLxH: 16.5 x 15.3 x 12.7 cm
• Weight: 1.9 kg

點我放大

CoolBox CFT30 System

• CAT#BCS-166
• With lid, blue +2˚C cartridge, red stage, insulator pad.
• 30 x cryo vial or flow tube
• WxLxH: 16.5 x 15.3 x 12.7 cm
• Weight: 1.9 kg

點我放大

CoolBox Microplate System

• Cat#BCS-144
• For 96 or 384 well plate
• WxLxH: 18.4 x 12.7 x 12.7 cm
• Weight: 0.8 kg

點我放大

CoolBox PCR96 System

• Cat#BCS-145
• For 96 well plate and CoolRack PCR96 system
• WxLxH: 16.5 x 15.3 x 12.7 cm
• Weight: 1.9 kg

點我放大

CoolBox PCR384 System

Cat#BCS-146
• For 384 well plate and CoolRack PCR384 system
• WxLxH: 16.5 x 15.3 x 12.7 cm
• Weight: 1.9 kg

點我放大

CoolBox 96F System

• Cat#BCS-147
• For 96 well plate and CoolSink 96F system
• WxLxH: 16.5 x 15.3 x 12.7 cm
• Weight: 1.6 kg

點我放大

CoolBox 96U System

• Cat#BCS-148
• For 96 U well plate and CoolSink 96U system
• WxLxH: 16.5 x 15.3 x 12.7 cm
• Weight: 1.6 kg

點我放大

CoolBox 96x1ml System

• Cat#BCS-151
• For 96 x 1ml system
• 96 x 1 ml storage tube
• WxLxH: 16.5 x 15.3 x 12.7 cm
• Weight: 1.6 kg

點我放大

-12C cartridge for CoolBox 30 System

• Cat#BCS-131
• Maintain -20° – -4°C up to 6h
• Re-chargeable cartridges for CoolBox 30 System
• WxLxH: 10.8 x 10.2 x 2.5 cm
• Weight: 0.16 kg

點我放大

+2C cartridge for CoolBox 30 System

Cat#BCS-132
• Maintain -0.5° – 4°C up to 6h
• Re-chargeable cartridges for CoolBox 30 System
• WxLxH: 10.8 x 10.2 x 2.5 cm
• Weight: 0.16 kg

點我放大

+2C cartridge for CoolBox Microplate System

• Cat#BCS-152
• Maintain 4°C up to 10h
• Re-chargeable cartridges for CoolBox Microplate System
• WxLxH: 12.1 x 8.9 x 3.8 cm
• Weight: 0.54 kg

點我放大

CoolBox™ XT System

Cat#BCS-502

Benchtop ice-free cooling system; includes foam base, collar and lid and 1 XT Cooling Core. Provides over 16 hours of cooling, without ice or power. Compatible with a variety of CoolRack and CoolSink modules including some with automation-compatible features.

With several color to chose
Purple, BCS-502
Orange, BCS-502O
Green, BCS-502G
Pink, BCS-502PK

點我放大

CoolBox™ 2XT System

Cat#BCS-503

Double capacity benchtop cooling system providing over 16 hours of cooling, without ice or power. Compatible with a variety of CoolRack and CoolSink modules including some with automation-compatible features.

With Different Color to choose
Purple, BCS-503
Orange, BCS-503O
Green, BCS-503G
Pink, BCS-503PK

點我放大

XT Extension Collar

Cat#BSC-502-C

Extension collars for CoolBox XT. Place between the base and original collar to extend the height of the ice-free workstation and enable the use of taller CoolRack sample tube modules including:
- 3, 4, 5ml Cryovials
- CoolRack 15ml
- CoolRack 50ml
- CoolRack V-series for blood tubes.

點我放大

2XT Extension Collar

Cat#BCS-503-C

Extension collars for CoolBox XT. Place between the base and original collar to extend the height of the ice-free workstation and enable the use of taller CoolRack sample tube modules including:
- 3, 4, 5ml Cryovials
- CoolRack 15ml
- CoolRack 50ml
- CoolRack V-series for blood tubes.

點我放大

XT Cooling Core

Cat#BCS-511

Reusable cooling core for use in CoolBox XT and CoolBox 2XT Systems. Pre-freeze in a -20℃ freezer until frozen, then place in CoolBox XT base when ready to work. Provides more than 16 hours of ice-free, power-free benchtop sample cooling.

One XT Cooling Core fits in CoolBox XT System and Workstations. Two XT Cooling Cores fit in double-capacity CoolBox 2XT System and Workstations.

點我放大

XT Freezing Core

BCS-512

Reusable freezing core for use in CoolBox XT and CoolBox 2XT Systems. Pre-freeze in a -20℃ or -80℃ freezer until frozen, then place in CoolBox XT base when ready to work. Provides more than 8 hours of ice-free, power-free benchtop sample freezing.


One XT Freezing Core fits in CoolBox XT System and Workstations. Two XT Freezing Cores fit in double-capacity CoolBox 2XT System and Workstations

點我放大

CoolBox™ XT General Purpose Workstations

BCS-550

For enzyme storage, snap-freezing, DNA precipitation or other applications. Contains one CoolRack M15 for use with
15 microtubes (1.5ml or 2.0ml).

Includes
CoolBox XT System
CoolRack M15
TruCool_Microfuge_Tubes

點我放大

CoolBox™ XT PCR96 Workstation

Cat# BCS-552

Complete ice-less cooling station to maintain PCR samples at 0.5 to 4˚C for over 16 hours without power. Includes CoolBox XT system, CoolRack PCR96 to hold a 96-well plate or strip well tubes, and one pack of 500 TruCool microfuge tubes.

點我放大

CoolBox™ 2XT PCR96 Workstation

BCS-553

Complete ice-less, double-capacity PCR prep cooling station to maintain samples at 0.5 to 4°C without power. Includes CoolBox 2XT system, CoolRack PCR96 to hold a 96-well PCR plate or strip well tubes, CoolRack M15 to hold 15 microfuge tubes and one pack of 500 TruCool microfuge tubes.

點我放大

CoolBox™ 2XT Cell Staining Workstation

BCS-554

Complete ice-less double-capacity cooling station to maintain samples at 0.5 to 4°C without power. Includes CoolBox 2XT system, CoolRack M15 to hold 15 microfuge tubes, CoolSink 96F to hold one 96-well flat-bottom plate and one pack of 500 TruCool microfuge tubes.

點我放大

CoolBox™ 2XT Assay Workstation

BCS-555

Complete ice-less double-capacity cooling station to maintain samples at 0.5 to 4˚C for over 16 hours without power. Includes CoolBox 2XT system, CoolRack M15 to hold 15 microfuge tubes, CoolSink 96U to hold one 96-well u-bottom plate and one pack of 500 TruCool microfuge tubes

點我放大

CoolBox™ XT PCR96 Workstation (AF)

BCS-570

Complete ice-less cooling station for PCR sample preparation to maintain samples at 0.5 to 4˚C for over 16 hours without power. Includes CoolBox XT system, automation-compatible CoolRack XT PCR96 to hold one 96-well PCR plate or strip well tubes and one pack of 500 TruCool microfuge tubes. Easily transfer samples from the CoolBox XT cooling workstation to the robotic platform

點我放大

CoolBox™ XT PCR384 Workstation (AF)

BCS-571

Complete ice-less cooling station to maintain samples at 0.5 to 4˚C for over 16 hours without power during PCR preparation. Includes CoolBox XT system, automation-compatible CoolRack XT PCR384 to hold one 384-well PCR plate and one pack of 500 TruCool microfuge tubes. Easily transfer samples from the CoolBox XT cooling workstation to the robotic platform.

點我放大

CoolBox™ XT PCR Strip Workstation (AF)

Cat# BCS-572

Complete ice-less cooling station for PCR preparation to maintain samples at 0.5 to 4˚C for over 16 hours without power. Includes CoolBox XT system, automation-compatible CoolRack XT M-PCR to hold 12 x 1.5 or 2.0ml microcentrifuge tubes and 6 rows of PCR strip tubes, and one pack of 500 TruCool microfuge tubes. Easily transfer samples from the CoolBox XT cooling workstation to the robotic platform.

點我放大

CoolBox™ XT Cell Freezing Workstation (AF)

BCS-574

Complete ice-less cooling station to maintain samples at 0.5 to 4˚C for over 16 hours without power with included controlled-rate freezing containers for cryopreservation. Includes CoolBox XT system, automation-compatible CoolRack XT CFT24 to hold up to 24 standard 12.5mm diameter cryogenic tubes and with "gripping" wells for one-hand tube manipulation, two CoolCell cell freeing containers for controlled-rate freezing of up to 24 cryovial samples, and one pack of TruCool cryogenic tubes. Easily transfer samples from the CoolBox XT cooling workstation to the robotic platform.

點我放大

CoolBox™ XT CryoTube 24 Workstation (AF)

Cat#BCS-575

Complete ice-less cooling station to maintain samples at 0.5 to 4℃ for over 16 hours without power. Includes CoolBox XT system, automation-compatible CoolRack XT CFT24 to hold up to 24 standard 12.5mm diameter cryogenic vials and with "gripping" wells for one-hand tube manipulation, and one pack of 500 TruCool Cryogenic tubes. Easily transfer samples from the CoolBox XT cooling workstation to the robotic platform.

點我放大

CoolBox™ XT MicroTube 24 Workstation (AF)

Cat#BCS-576

Complete ice-less cooling station to maintain samples at 0.5 to 4℃ for over 16 hours without power. Includes CoolBox XT system, automation-compatible CoolRack XT M24 to hold 24 1.5ml or 2.0ml microfuge tubes, and one pack of 500 TruCool microfuge tubes. Easily transfer samples from the CoolBox XT cooling workstation to the robotic platform.

點我放大

CoolBox™ XT Protein Assay Workstation (AF)

Cat#BCS-578

Complete ice-less cooling station to maintain samples at 0.5 to 4˚C for over 16 hours without power. Includes CoolBox XT system, automation-compatible CoolSink XT 96U to hold one 96-well u-bottom plate for performing Bradford or other assays, and one pack of 500 TruCool microfuge tubes. Easily transfer samples from the CoolBox XT cooling workstation to the robotic platform.

點我放大

CoolBox™ 2XT PCR Workstation (AF)

Cat#BCS-573

Complete ice-less double-capacity cooling station to maintain samples at 0.5 to 4℃ for over 16 hours without power during PCR preparation. Includes CoolBox 2XT system, automation-compatible CoolRack XT M24 to hold 24 1.5ml or 2.0ml microfuge tubes, automation-compatible CoolRack XT PCR96 to hold a 96-well PCR plate or strip well tubes, and one pack of 500 TruCool microfuge tubes. Easily transfer sample modules from the CoolBox 2XT cooling workstation to the robotic platform or other instrument of choice.

點我放大

CoolBox™ 2XT Microtube & Cryotube Workstation (AF)

Cat#BCS-577

Complete ice-less double-capacity cooling station to maintain samples at 0.5 to 4˚C for over 16 hours without power. Includes CoolBox 2XT system, automation-compatible CoolRack XT M24 to hold 24 1.5ml or 2.0ml microfuge tubes, automation-compatible CoolRack XT CFT24 to hold 24 standard 12.5mm diameter cryogenic tubes, Cryocepts vial extractors, one pack of 500 TruCool microfuge tubes and one pack of 50 TruCool cryogenic tubes. Easily transfer samples from the CoolBox 2XT cooling workstation to the robotic platform.

點我放大

CoolBox™ 2XT Cell Staining Workstation (AF)

Cat#BCS-579

Complete ice-less double-capacity cooling station to maintain samples at 0.5 to 4˚C for over 16 hours without power. Includes CoolBox 2XT system, automation-compatible CoolRack XT M24 to hold 24 1.5ml or 2.0ml microfuge tubes, automation-compatible CoolSink XT 96F to maintain tissue culture plate at constant cooling temperature during cell staining and preparation, and one pack of 500 TruCool microfuge tubes. Easily transfer samples from the CoolBox 2XT cooling workstation to the robotic platform.

點我放大

CoolBox™ 2XT Assay Workstation (AF)

Cat#BCS-580

Complete ice-less double-capacity cooling station to maintain samples at 0.5 to 4˚C for over 16 hours without power during assay preparation. Includes CoolBox 2XT system, automation-compatible CoolRack XT M24 to hold 24 1.5ml or 2.0ml microfuge tubes, automation-compatible CoolSink XT 96U to hold one 96-well u-bottom plate for multiplexed protein assays, and one pack of 500 TruCool microfuge tubes. Easily transfer samples from the CoolBox 2XT cooling workstation to the robotic platform or other instrument of choice.

點我放大

CoolRack® M90

• Cat#BCS-102
• 90 wells
• 1.5ml and 2.0ml tubes
• LxWxH : 11.2 x 26.8 x 3.8 cm
• Weight: 5.0 lbs

點我放大

CoolRack® M30

• Cat#BCS-108
• 30 wells
• 1.5ml and 2.0ml tubes
• LxWxH : 12.0 x 10.2 x 3.8 cm
• Weight: 1.00 lbs

點我放大

CoolRack® M96ID

• Cat#BCS-116
• 96 wells
• 1.5 ml and 2.0 ml tubes
• WxLxH : 15.2 x 25.4 x 3.8 cm
• Weight: 7.0 lbs

點我放大

CoolRack® M15

• Cat#BCS-125
• 15 wells
• 1.5 ml and 2.0 ml tubes
• LxWxH : 10.2 x 6.4 x 3.8 cm
• Weight: 1.00 lbs

點我放大

CoolRack® M15-PF

• Cat#BCS-127
• 15 wells
• 1.5 ml tubes
• WxLxH : 10.2 x 6.4 x 3.8 cm
• Weight: 1.0 lbs

點我放大

CoolRack® M30-PF

• Cat#BCS-128
• 30 wells
• 1.5 ml tubes
• WxLxH: 12 x 10.2 x 3.8 cm
• Weight: 1.00 lbs

點我放大

CoolRack® M6

• Cat#BCS-163
• 6 wells
• 1.5 ml and 2.0 ml tubes
• WxLxH: 7.6 x 3.8 x 3.8 cm
• Weight: 0.22 kg

點我放大

CoolRack® 15ml

• Cat#BCS-153
• 9 wells
• 15 ml centrifuge tube
• WxLxH: 8.9 x 8.9 x 11.2 cm
• Weight: 2.7 kg

點我放大

CoolRack® 50ml

• Cat#BCS-154
• 4 wells
• 50 ml centrifuge tube
• WxLxH: 8.9 x 8.9 x 10.7 cm
• Weight: 2.7 kg

點我放大

CoolRack® PCR96

• Cat#BCS-120
• 96 well plate
• WxLxH: 8.9 x 13.2 x 3.3 cm
• Weight: 0.45 kg

點我放大

CoolRack® PCR384

• Cat#BCS-139
• 384 well plate
• WxLxH: 8.9 x 13.2 x 3.3 cm
• Weight: 0.7 kg

點我放大

CoolRack® CF45

• Cat#BCS-105
• 45 wells
• 12 x 75 mm flow tube
• WxLxH: 9.7 x 17.3 x 3.8 cm
• Weight: 5.00 lbs

點我放大

CoolRack® CF15

• Cat#BCS-126
• 15 wells
• 12 x 75 mm flow tube
• WxLxH: 10.2 x 6.4 x 3.8 cm
• Weight: 3.00 lbs

點我放大

CoolRack® CF30

• Cat#BCS-129
• 30 wells
• cryo vial and 12 x 75 mm flow tube
• WxLxH: 12 x 10.2 x 3.8 cm
• Weight: 1 kg

點我放大

CoolRack® CFT30

Cat#BCS-138
• 30 wells
• 12 x 75 mm flow tube
• WxLxH: 12 x 10.2 x 3.8 cm
• Weight: 2.00 lbs

點我放大

CoolRack® Mass Spec

• Cat#BCS-140
• 30 wells
• 300 or 700 ul Mass tube
• WxLxH: 11.4 x 27.4 x 3.8 cm
• Weight: 2.7 kg

點我放大

CoolRack® 96 x 1ml

• Cat#BCS-149
• 96 wells
• 1 ml storage tube
• WxLxH: 8.9 x 13.2 x 4.3 cm
• Weight: 1 kg

點我放大

CoolRack® VT13

• Cat#BCS-155
• 9 wells
• 13 x 100 mm vacuum tube
• WxLxH: 8.9 x 8.9 x 8.9 cm
• Weight: 2.7 kg

點我放大

CoolRack® VT16

• Cat#BCS-156
• 9 wells
• 16 x 100 mm vacuum tube
• WxLxH: 8.9 x 8.9 x 8.9 cm
• Weight: 0.54 kg

點我放大

CoolRack® VS13

• Cat#BCS-157
• 9 wells
• 16 x 75 mm vacuum tube
• WxLxH: 8.9 x 8.9 x 6.6 cm
• Weight: 1 kg

點我放大

CoolRack® 96 x 0.5ml

Cat#BCS-231

CoolRack® 96 x 0.5ml
96-well thermo-conductive module for 0.5ml storage tubes

點我放大

CoolRack® XT PCR96 (AF)

• Cat#BCS-529
• 96-well PCR plate
• strip-wells or 200 uL tubes
• LxWxH : 12.7 x 8.6 x 2.5 cm
• Weight: 2.0 lbs

點我放大

CoolRack® PCR384

• Cat#BCS-538
• 384-well PCR plate
• LxWxH : 12.8 x 8.5 x 1.8 cm
• Weight: 2.0 lbs

點我放大

CoolRack® XT CFT24 (AF)

• Cat#BCS-534
• 24 wells
• 12.5mm diameter cryogenic vials or 12 x 75 mm FACS tubes
• LxWxH : 12.8 x 8.5 x 3.8 cm
• Weight: 2.0 lbs

點我放大

CoolRack® XT M24 (AF)

• Cat#BCS-535
• 24 wells
• 1.5 or 2.0 ml microcentrifuge tubes
• LxWxH : 12.8 x 8.5 x 3.8 cm
• Weight: 2.0 lbs

點我放大

CoolRack® XT M-PCR (AF)

• Cat#BCS-523
• 12 x 1.5 or 2.0ml microcentrifuge tubes and 6 rows of PCR strip wells
• LxWxH : 12.7 x 8.6 x 3.8 cm
• Weight: 2.0 lbs

點我放大

CoolSink 48

• Cat#BCS-101
• 6-, 12-, 24-, 48-well plate
• WxLxH: 13.2 x 8.9 x 1.8 cm
• Weight: 0.8 kg

點我放大

CoolSink 96F

• Cat#BCS-106
• 96 well flat-bottom plates
• WxLxH: 13.2 x 8.9 x 1.8 cm
• Weight: 0.8 kg

點我放大

CoolSink 96U

• Cat#BCS-107
• 96 well round-bottom plates
• WxLxH: 13.2 x 8.9 x 1.8 cm
• Weight: 0.8 kg

點我放大

CoolSink™ BX50

Cat#BCS-180

CoolSink™ BX50
Thermo-conductive reagent reservoir holder for Biotix's BioX-Resin™ biodegradable 50ml reagent reservoirs.

點我放大

CoolSink™ BX100

Cat#BCS-183

CoolSink BX100 is a thermo-conductive reagent reservoir holder for Biotix's BioX-Resin™ biodegradable 100ml reagent reservoirs

點我放大

CoolSink™ XT 96F (AF)

BCS-536

CoolSink XT 96F is a thermo-conductive plate holder for 96-well flat-bottom plate. It maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other temperature sources. Or, keep samples cold or frozen in ice-free CoolBox XT or 2XT Systems and Workstations where samples stay cold without ice or electricity for over 16 hours, and frozen for over 10 hours.

SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.


Keeps all samples at uniform temperature while instantly organizing and protecting them.

點我放大

CoolSink™ XT 96U (AF)

BCS-537

CoolSink XT 96U is a thermo-conductive plate holder for one 96-well u-bottom plate that is compatible with standard automation equipment. It maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other temperature sources. Or, keep samples cold or frozen in ice-free CoolBox XT or 2XT Systems and Workstations where samples stay cold without ice or electricity for over 16 hours, and frozen for over 10 hours.

SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.

點我放大

CoolSink™ H

BCS-312

oolSink H is a thermo-conductive platform for a wide variety of histological applications. When placed on ice or dry ice it will rapidly equilibrate to the source temperature and provide a cold, flat and stable platform for applications including:

• tissue dissections

• rapid collection and freezing of tissue samples

• tissue OCT embedment and frozen slide sorting

CoolSink H is the ideal platform to use when it is necessary to preserve and maintain tissue structure, and/or the RNA and protein integrity of frozen tissues embedded in OCT prior to the preparation of frozen sections. It provides a more uniform and convenient method of freezing tissue samples than simply placing samples on dry ice, and it eliminates the need for organic ice bath slurries which require special handling and disposal procedures. The use of Coolsink H can improve the workflow of tissue and sample collection when a large number of samples are collected in a rapid and organized manner, such as is done in drug response studies, pharmacokinetic studies, and toxicological studies.

Diemesion :
10.2" x 20.3" x 1.3 cm. (W x L x H)

點我放大

CoolSink™ HL

BCS-313

CoolSink HL is a thermo-conductive platform for a wide variety of histological applications. When placed on ice or dry ice it will rapidly equilibrate to the source temperature and provide a cold, flat and stable platform for applications including:

• tissue dissections
• rapid collection and freezing of tissue samples
• tissue OCT embedment and frozen slide sorting

CoolSink HL is the ideal platform to use when it is necessary to preserve and maintain tissue structure, and/or the RNA and protein integrity of frozen tissues embedded in OCT prior to the preparation of frozen sections. It provides a more uniform and convenient method of freezing tissue samples than simply placing samples on dry ice, and it eliminates the need for organic ice bath slurries which require special handling and disposal procedures. The use of Coolsink HL can improve the workflow of tissue and sample collection when a large number of samples are collected in a rapid and organized manner, such as is done in drug response studies, pharmacokinetic studies, and toxicological studies.

Dimensions:：20.3 x 27.9 x 1.3 cm. (W x L x H)

點我放大

CoolSink™ HS

BCS-315

CoolSink HS flat slide sorter is a novel tool that enables one to hold, organize, and incubate microscope slide samples in various types of environments. CoolSink HS flat slide sorter is designed to be placed on ice, dry ice, warming plate or incubator for standardized and temperature-controlled incubations and staining, and in situ hybridization. CoolSink HS provides a uniform and secure platform for slide processing. Carved reservoir enables incubation with solutions, if needed.

Dimensions:
14.0 x 32.3 x 1.3 cm. (W x L x H)

點我放大

CoolSink™ HST

BCS-314

CoolSink HST vertical slide sorter ensures cryoslides remain frozen and organized while working on the cryotome. The reduced temperature is essential for both preserving antigenic sites as well as RNA quality.

Frozen tissue sections can preserve the antigenic sites or the enzyme activity of ed targets that are lost with chemical fixation. Additionally, if tissues are to be used for laser capture microdissection (LCM), RNA quality must be preserved by maintaining reduced temperatures in a RNase free environment. The CoolSink HST vertical slide holder offers a convenient and reliable tool to ensure that frozen sections are maintained at reduced temperatures in a format that allows for multiple sections to be processed at one time. Slide labels are easily viewed while slides are in this vertical position.

Place CoolSink HST on dry ice in BioCision’s midi 4L ice pan or directly on the cryotome. Convenient handles provide easy transport and temperature management of 10 slides at a time.

CoolSink HST can be autoclaved or high-heat sterilized with the handles removed, or decontaminated with bleach, alcohol solutions, or RNase inactivating solutions. Holds 10 slides

點我放大

CoolSink™ HCD

BCS-311
CoolSink HCD thermo-conductive culture dish platform is designed to stabilize and equalize the temperature of Corning culture dishes. The module features recesses to accept the ring stand-off on the underside of the dishes, enabling maximal thermal contact between the CoolSink top surface and the underside of the dish.

For tissue processing, the CoolSink HCD series allows tissue samples to be processed in a sterile culture dish while the dish is stabilized and at the desired temperature in a biosafety cabinet. When tissues are dissociated, as in the case of stem cell isolation, or “cancer stem cell” isolation, or for FACS analysis, they require a combination of mechanical and enzymatic treatments to digest to single cells. The CoolSink HCD series provides the support, the thermal contact for temperature regulation, and the ability to easily manipulate the tissue in a biosafety cabinet.

Use for a variety of other applications including warm or cold incubations for cell harvesting or lysis, rapid agar solidification for growth independence, solutions or media incubations. CoolSink HCD is necessary when samples must be kept sterile and when cell viability is important during processing.

The locking recesses permit the user to manipulate both hands when processing tissue or cellular samples. Place on ice, dry ice or other cold or warm sources and CoolSink HCD will rapidly adapt to source temperature. Rubber feet allow for placement in a biosafety cabinet for stable manipulation, but are removable if placing on a ThermalTray™ for water bath incubations or when autoclaving.

Accommodates Corning brand 35mm, 60mm, 100mm and 150mm culture dishes. Autoclavable, high heat sterilizable and compatible with bleach, alcohol and common laboratory detergents.

Dimensions:
6.25 x 6.25 x 0.35 in. (W x L x H)
15.9 x 15.9 x 0.9 cm. (W x L x H)

點我放大

CoolSink™ HCD2

BCS-310
CoolSink HCD2 thermo-conductive culture dish platform is designed to stabilize and equalize the temperature of Corning culture dishes. The module features recesses to accept the ring stand-off on the underside of the dishes, enabling maximal thermal contact between the CoolSink top surface and the underside of the dish.

For tissue processing, the CoolSink HCD series allows tissue samples to be processed in a sterile culture dish while the dish is stabilized and at the desired temperature in a biosafety cabinet. When tissues are dissociated, as in the case of stem cell isolation, or “cancer stem cell” isolation, or for FACS analysis, they require a combination of mechanical and enzymatic treatments to digest to single cells. The CoolSink HCD series provides the support, the thermal contact for temperature regulation, and the ability to easily manipulate the tissue in a biosafety cabinet.

Use for a variety of other applications including warm or cold incubations for cell harvesting or lysis, rapid agar solidification for growth independence, solutions or media incubations. CoolSink HCD2 is necessary when samples must be kept sterile and when cell viability is important during processing.

The locking recesses permit the user to manipulate both hands when processing tissue or cellular samples. Place on ice, dry ice or other cold or warm sources and CoolSink HCD2 will rapidly adapt to source temperature. Rubber feet allow for placement in a biosafety cabinet for stable manipulation, but are removable if placing on a ThermalTray™ for water bath incubations or when autoclaving.

Accommodates Corning brand 35mm, 60mm and 100mm culture dishes. Autoclavable, high heat sterilizable and compatible with bleach, alcohol and common laboratory detergents.


Dimensions:
4.5 x 4.5 x 0.35 in. (W x L x H)
11.4 x 11.4 x 0.9 cm. (W x L x H)

點我放大

CoolSink™ HCD3

BCS-316
CoolSink HCD3 thermo-conductive culture dish platform is designed to stabilize and equalize the temperature of Corning culture dishes. The module features recesses to accept the ring stand-off on the underside of the dishes, enabling maximal thermal contact between the CoolSink top surface and the underside of the dish.

For tissue processing, the CoolSink HCD series allows tissue samples to be processed in a sterile culture dish while the dish is stabilized and at the desired temperature in a biosafety cabinet. When tissues are dissociated, as in the case of stem cell isolation, or “cancer stem cell” isolation, or for FACS analysis, they require a combination of mechanical and enzymatic treatments to digest to single cells. The CoolSink HCD series provides the support, the thermal contact for temperature regulation, and the ability to easily manipulate the tissue in a biosafety cabinet.

Use for a variety of other applications including warm or cold incubations for cell harvesting or lysis, rapid agar solidification for growth independence, solutions or media incubations. CoolSink HCD3 is necessary when samples must be kept sterile and when cell viability is important during processing.

The locking recesses permit the user to manipulate both hands when processing tissue or cellular samples. Place on ice, dry ice or other cold or warm sources and CoolSink HCD3 will rapidly adapt to source temperature. Rubber feet allow for placement in a biosafety cabinet for stable manipulation, but are removable if placing on a ThermalTray™ for water bath incubations or when autoclaving.

Accommodates Corning brand 100mm culture dishes with lid on. Autoclavable, high heat sterilizable and compatible with bleach, alcohol and common laboratory detergents.

Corning brand is a registered trademark of Corning, Incorporated.
Dimensions:
4.5 x 4.5 x 0.35 in. (W x L x H)
11.4 x 11.4 x 0.9 cm. (W x L x H)

點我放大

HistoMailer™

BCS-300
HistoMailer provides safe shipping of up to four histology embedded biopsy cassettes. The secure postion of each cassette prevents cassettes from ing and cross-contamination during shipping. Each sample can be labeled and clearly identified at all times, minimizing mis-identification or sample mix-ups. Organized shipping of samples can be done at room temperature or col (on ice or dry ice).

Made of eco-friendly recycled PET material, HistoMailer can also be used for long term storage.

點我放大

HistoMailer

BCS-301
HistoMailer provides safe shipping of up to four histology embedded biopsy cassettes. The secure postion of each cassette prevents cassettes from ing and cross-contamination during shipping. Each sample can be labeled and clearly identified at all times, minimizing mis-identification or sample mix-ups. Organized shipping of samples can be done at room temperature or col (on ice or dry ice).

Made of eco-friendly recycled PET material, HistoMailer can also be used for long term storage.

點我放大

CoolMat™

BCS-141
Polyethylene mat for histological preparation on a cold surface. The CoolMat is thin enough to readily transmit heat to the ThermalTray (not included), thick enough to protect scalpel and ThermalTray for repeated use, and remains flexible under freezing conditions.
4pc/pk
27.7 x 13.7 cm. (W x L)

點我放大

CoolMat™ H

BCS-302
CoolMat H is a polyethylene protective cover for CoolSink H during histological preparations. Contoured to fit around the CoolSink H handles precisely and cover entire top surface. CoolMat H is thin enough to not inhibit thermal contact between the cold CoolSink surface and the sample, and thick enough to protect scalpel blade and CoolSink surface during dissecting. Can be cleaned with bleach or alcohol for repeated use. Remains flexible under freezing conditions.

qty:4
10.2 x 20.3 cm. (W x L)

點我放大

CoolMat™ HL

BCS-303

CoolMat HL is a polyethylene protective cover for CoolSink HL during histological preparations. Contoured to fit around the CoolSink HL handles precisely and cover entire top surface. CoolMat HL is thin enough to not inhibit thermal contact between the cold CoolSink surface and the sample, and thick enough to protect scalpel blade and CoolSink surface during dissecting. Can be cleaned with bleach or alcohol for repeated use. Remains flexible under freezing conditions.

qty:4
20.3 x 27.9 cm. (W*L)

點我放大

ThermalTray HP

• Cat#BCS-104
• Maintain low temp. up to 12h
• WxLxH: 14 x 28 x 10 cm
• Weight: 2.2 kg

點我放大

ThermalTray LP

• Cat#BCS-123
• Maintain low temp. up to 12h
• WxLxH: 14 x 28 x 5 cm
• Weight: 2.2 kg

點我放大

CoolTray

• Cat#BCS-124
• Maintain low temp. up to 10h
• 15 and 50 ml centrifuge tube
• WxLxH: 14 x 28 x 5 cm
• Weight: 2.2 kg

點我放大

ThermalTray SLP

Cat#BCS-252

ThermalTray SLP
Thermo-conductive platform for liquid nitrogen

點我放大

CoolSystem M90

• Cat#BCS-117
• Includes ThermalTray LP, CoolRack M90
• Maintain low temp. up to 12h
• 90 x 1.5 ml eppendorf
• WxLxH: 33 x 40.6 x 12.4 cm
• Weight: 5.1 kg

點我放大

CoolSystem M30x3

• Cat#BCS-118
• Includes ThermalTray LP, CoolRack M30
• Maintain low temp. up to 12h
• 90 x 1.5 ml eppendorf
• WxLxH: 33 x 40.6 x 12.4 cm
• Weight: 5.1 kg

點我放大

CoolSystem CF45

• Cat#BCS-119
• Includes ThermalTray LP, CoolRack CF45
• Maintain low temp. up to 12h
• 45 x flow tube
• WxLxH: 33 x 40.6 x 12.4 cm
• Weight: 3.8 kg

點我放大

CoolSystem PCR96(1)

• Cat#BCS-121
• Includes ThermalTray LP, CoolRack PCR96
• Maintain low temp. up to 12h
• 96 plate
• WxLxH: 33 x 40.6 x 12.4 cm
• Weight: 2.9 kg

點我放大

CoolSystem PCR96(3)

• Cat#BCS-122
• Includes ThermalTray LP, CoolRack PCR96
• Maintain low temp. up to 12h
• 3 x 96 plate
• WxLxH: 33 x 40.6 x 12.4 cm
• Weight: 3.8 kg

點我放大

CoolSystem™ CRYO

• Cat#BCS-142
• Includes CoolCell -12vial, CFT30 CoolBox System
• Maintain low temp. up to 10h
• Diam x H : 11.7 x 10.9 cm
• WxLxH: 16.5 x 15.3 x 12.7 cm
• Weight: 4.3 kg

點我放大

CoolBox™ XT CryoTube 15 Workstation

Complete ice-less cooling station to maintain samples at 0.5 to 4℃ for over 16 hours without power. Includes CoolBox XT system, CoolRack CF15 to hold 15 cryovials and one pack of 50 TruCool™ 2ml cryogenic tubes

點我放大

Protein / Nucleic Acid Handling CoolSystem

BCS-240

Uniform temperature control for tubes and plates during Protein / Nucleic Acid procedures. Eliminate temperature variability and ensure highly reproducible results through standardization of procedures typically performed in ice, dry ice, water baths and other passive temperature sources.
Precision-engineered thermo-conductive modules provide consistent and uniform temperature control through direct contact with ice, dry ice, liquid nitrogen, waterbath, hot plate or other temperature source. Ideal for cooling, (snap)freezing,incubating, thawing. Minimizes variability, user error and contamination.
Kit Includes:
CoolRack M30-PF:-Thermo-conductive CoolRack for up to 30 1.5ml conical microcentrifuge tubes.
CoolSink 96F - Thermo-conductive CoolSink plate holder for one 96-well flat-bottom plate. Provides a stable base for plate and eliminates "edge effect" and other well-to-well variability.
ThermalTray LP - Solid, stable platform to support the CoolRack and CoolSink modules in liquid temperature sources, such as melted ice. Allows over 12 hours 0-4°C cooling with one pan of ice.
Maxi 9L Ice Bucket - Unbreakable, insulative container for ice, dry ice, liquid nitrogen.

點我放大

Protein / Nucleic Acid CoolSystem Ice-Free

BCS-241
Uniform, ice-free temperature control for tubes and plates during Protein / Nucleic Acid procedures. Eliminate temperature variability and ensure highly reproducible results through standardization of procedures typically performed in ice, dry ice, water baths and other passive temperature sources.
Precision-engineered thermo-conductive modules provide consistent and uniform temperature control through direct contact with ice, dry ice, liquid nitrogen, waterbath, hot plate or other temperature source. Ideal for cooling, (snap)freezing, incubating, thawing. Minimizes variability, user error and contamination.
Kit Includes:
CoolBox M30-PF - Ice-free cooling/freezing container for 30 1.5ml conical microcentrifuge tubes.
CoolBox 96F - Ice-free cooling/freezing container for 96-well flat-bottom plate.

點我放大

Microbiology CoolSystem

BCS-242

Complete microbiology handling kit for benchtop cooling, freezing or warming with less variability, handling error and contamination. Maintain a less crowded environment in a biosafety laminar flow hood for work in BSL-2/ BSL-3 or at the bench. Easy decontamination through bleaching, autoclaving, or using iodine based products.
Precision-engineered thermo-conductive modules provide consistent and uniform temperature control through direct contact with ice, dry ice, liquid nitrogen, waterbath, hot plate or other temperature source. Ideal for cooling, (snap)freezing,incubating, thawing. Minimizes variability, user error and contamination.
Kit Includes:
CoolRack CFT30 - Thermo-conductive CoolRack for 30 cryo vials. "Gripping" well design enables one-hand vial ing/closing. Ideal for cold and hot incubations, snap-freezing microorganisms for storage in dry ice (ethanol-free) to avoid loss of titre.
CoolSink BX50 - thermo-conductive reagent reservoir holder for Biotix BioX-resin 50ml reservoirs. Keeps virus preparations cold on a solid base while dispensing to plates for virus infection. Can also be used for cell dispensing into plates.
CoolSink 48 - Thermo-conductive CoolSink plate holder for one 6-, 12-, 24- or 48-well plate. Keeps platecold for viral infections, compound addition, incubations or any other assay.

點我放大

PCR Prep (Ice-Free) CoolSystem ™

BCS-243

ice-free PCR preparation kit. Stable workstation and uniform temperature control for 200ul tubes, plates and strips. Maintains your samples, buffers and enzymes at <4 °C in an orderly manner as you prepare any reaction: RT-PCR, q-PCR, or endpoint PCR. Eliminates temperature variability, minimizes the risk of contamination and ensures highly reproducible results through temperature standardization of procedures typically performed in ice. Kit Includes: CoolBox PCR96 - Ice-free cooling container and thermo-conductive module for 96-well 0.2ml PCR plates/tubes/strips. Keeps all wells at uniform temperature (0.5°C to 4.0°C) for up to 10 hours. CoolRack M15 - Ice-free cooling container and thermo-conductive module for 96-well 0.2ml PCR plates/tubes/strips. Keeps all wells at uniform temperature (0.5°C to 4.0°C) for up to 10 hours. Mini 1L ice pan - Unbreakable, insulative ice container to keep CoolRack M15 cold on ice.

點我放大

Tissue Dissection CoolSystem

BCS-245

Complete tissue dissection kit for keeping tissues moist and fresh while dissecting on the bench top. Avoids tissue drying and desiccation during sectioning. Accumulate samples and process later. CoolMat is thin enough to readily transmit heat to the ThermalTray and keep samples at temperature of cooling source (ice, dry ice, etc), yet thick enough to protect scalpel and ThermalTray for repeated use. Remains flexible under freezing conditions. ThermalTray is made of novel thermo-conductive material that rapidly equilibrates to temperature sources such as ice, dry ice, liquid nitrogen, water baths. Kit includes: CoolMat - Mat for histological preparation on cold ThermalTray surface. Protects scalpel blade from rapid dulling and ThermalTray surface from cosmetic abrasions. ThermalTray LP - Solid, stable thermo-conductive platform that equilibrates within 90 seconds on ice to <4°C and becomes an ideal dissecting station. Provides over 12 hours 0-4°C cooling with one pan of ice. Maxi 9L Ice Bucket - Unbreakable, insulative container for ice, dry ice or liquid nitrogen.

點我放大

CryoLabels

BCS-168

CryoLabels with lab marker for labeling. Specifically designed to handle cryogenic temperatures and adhere to a variety of tubes, vials and plates. Repeated application and removal of tape will not affect surface.

50 labels + 3 pens in each pack.

點我放大

CoolProbe™ U

BCS-200

CoolProbe traceable thermometer with universal probe fitting provides accurate sample tube or plate temperature monitoring while cooling in CoolRack or CoolSink thermo-conductive modules. Universal probe can be placed in tubes or plates and displays high, low and current temperature, with memory and alarm features. NIST traceable and comes with certification.
CoolProbe™ U

點我放大

CoolProbe™ M

CoolProbe M

CoolProbe traceable thermometer with microfuge tube probe fitting provides accurate sample temperature monitoring while cooling in CoolRack M-series thermo-conductive microfuge tube modules. Microfuge tube-shaped probe snugly fits in wells of the CoolRack M modules and displays high, low and current sample temperature, with memory and alarm features. NIST traceable and comes with certification.

點我放大

CoolProbe™ CF

BCS-202

CoolProbe traceable thermometer with cryo vial probe fitting provides accurate sample temperature monitoring while cooling in CoolRack CF-series thermo-conductive cryo vial modules. Cryo vial-shaped probe snugly fits in wells of the CoolRack CF modules and displays high, low and current sample temperature, with memory and alarm features. NIST traceable and comes with certification.

點我放大

TruCool™ Carrying Tote

BCS-190

This insulated tote is perfect for carrying temperature-sensitive samples between labs or clinical sites. Interior is insulated and waterproof making it suitable for use with ice or dry ice, along with CoolRack or CoolSink sample holders. Keep samples uniformly cold or frozen during short transit.

點我放大

CryoCeps

BCS-213

CryoCeps cryovial grippers are the perfect tool to protect fingers when extracting frozen tubes from cryoboxes, CoolRack modules or CoolCell cell freezing containers. Unique design allows you to grip cryovials by the cap, lift the tube and move its position. Saves fingers from frosty maneuvers. Handles internal- or external-threaded tubes.

2 per bag.

點我放大

SafeStream

BCS-109

SafeStream flexible faucet puts an end to dangerous splashes from the laboratory sink. The versatile neck is easily positioned and produces a gentle, controlled water stream. Ideal for cleaning or filling lab vessels - inside or outside the sink.


Autoclavable. Available in three sizes - 10 inches, 20 inches or 30 inches.

點我放大

SafeStream M, 20 inches

BCS-103

SafeStream M, 20 inches
SafeStream flexible faucet puts an end to dangerous splashes from the laboratory sink. The versatile neck is easily positioned and produces a gentle, controlled water stream. Ideal for cleaning or filling lab vessels - inside or outside the sink.


Autoclavable. Available in three sizes - 10 inches, 20 inches or 30 inches.

點我放大

SafeStream L, 30 inches

BCS-110

SafeStream flexible faucet puts an end to dangerous splashes from the laboratory sink. The versatile neck is easily positioned and produces a gentle, controlled water stream. Ideal for cleaning or filling lab vessels - inside or outside the sink.


Autoclavable. Available in three sizes - 10 inches, 20 inches or 30 inches.

點我放大

0.5ml Ergonomic microcentrifuge tubes

BCS-2440

Ergonomic 0.5ml microcentrifuge tubes. Patented "pull back" cap s easily and minimizes risk of contamination. Ideal for use in CoolRack M series. Packed 500/bag, 10 bags/case.

BCS-2440, 0.5ml clear
BCS-2441, 0.5ml purple
BCS-2442, 0.5ml green
BCS-2443, 0.5ml orange
BCS-2444, 0.5ml blue
BCS-2445, 0.5ml pink
BCS-2450, 0.5ml clear, siliconized

點我放大

1.5ml TruCool™ microcentrifuge tubes

BCS-2460

Ergonomic 1.5ml microcentrifuge tubes. Patented "pull back" cap s easily and minimizes risk of contamination. Ideal for use in CoolRack M series. Packed 500/bag, 10 bags/case.

Item Numbers:
BCS-2460, 1.5ml clear
BCS-2461, 1.5ml purple
BCS-2462, 1.5ml green
BCS-2463, 1.5ml orange
BCS-2464, 1.5ml blue
BCS-2465, 1.5ml pink
BCS-2470, 1.5ml clear, siliconized

點我放大

2.0ml TruCool™ microcentrifuge tubes

BCS-2480
Ergonomic 2.0ml microcentrifuge tubes. Patented "pull back" cap s easily and minimizes risk of contamination. Ideal for use in CoolRack M series. Packed 500/bag, 10 bags/case.

Item Numbers:
BCS-2480, 2.0ml clear
BCS-2481, 2.0ml purple
BCS-2482, 2.0ml green
BCS-2483, 2.0ml orange
BCS-2484, 2.0ml blue
BCS-2485, 2.0ml pink
BCS-2490, 2.0ml clear, siliconized

點我放大

TruCool™ leak-proof cryogenic tubes(internal)

BCS-2410

TruCool™ leak-proof cryogenic tubes feature a screw cap with a thermally fused gasket to ensure a tight seal. The gasket is a co-molded thermoplastic elastomer (TPE) layer that replaces the traditional silicone O-ring and eliminates leaking, slipping and risk of contamination.

The gasket is 95kPa certified to provide a leak-proof seal.

Cryotubes are sterile and individually barcoded with a unique identifier which can be read with common barcode readers. Ideal for use in CoolRack® CF cryogenic tube modules and CoolCell® alcohol-free cell freezing systems. Sterile. Packed 500 per case (5 x 100/pack).

Item Numbers:
BCS-2410, 1ml, self-standing, sterile, internal-thread cryotubes with screwcap
BCS-2411, 2ml, self-standing, sterile, internal-thread cryotubes with screwcap
BCS-2412, 2ml, round-bottom, sterile, internal-thread cryotubes with screwcap
BCS-2413, 4ml, round-bottom, sterile, internal-thread cryotubes with screwcap
BCS-2414, 4ml, self-standing, sterile, internal-thread cryotubes with screwcap
BCS-2415, 5ml, round bottom, sterile, internal-thread cryotubes with screwcap
BCS-2416, 5ml, self-standing, sterile, internal-thread cryotubes with screwcap

點我放大

TruCool™ sterile cryogenic tubes - external

BCS-2400

TruCool™ leak-proof cryogenic tubes feature a screw cap with a thermally fused gasket to ensure a tight seal. The gasket is a co-molded thermoplastic elastomer (TPE) layer. The co-molded TPE gasket eliminates leaking, slipping and risk of contamination.

The gasket is 95kPa certified to provide a leak-proof seal.

Cryo tubes are sterile and individually barcoded with a unique identifier which can be read with common barcode readers. Ideal for use in CoolRack® CF cryo tube modules and CoolCell® alcohol-free cell freezing systems. Sterile. Packed 500 per case (5 x 100/pack).

Item Numbers:
BCS-2400, 1ml, self-standing, sterile, external-thread cryotubes with screwcap
BCS-2401, 2ml, round bottom, sterile, external-thread cryotubes with screwcap
BCS-2402, 2ml, self-standing, sterile, external-thread cryotubes with screwcap
BCS-2403, 3ml, self-standing, sterile, external-thread cryotubes with screwcap
BCS-2404, 4ml, self-standing, sterile, external-thread cryotubes with screwcap
BCS-2405, 5ml, self-standing, sterile, external-thread cryotubes with screwcap

點我放大

TruCool™ color-coded cryogenic tube cap

BCS-2420

Color-coded cap s for TruCool™ cryogenic tubes. Inserts snap easily into the cavity of both the internal- and external-threaded screwcaps.
600/pk

Blue, BCS-2420
Green, BCS-2421
Pink, BCS-2422
Red, BCS-2423
Yellow, BCS-2424
White, BCS-2425
Mixed, BCS-2426

點我放大

AQ-07 Nucleic Acid Meter

• Cat#007AS001
• Wavelengths: 260 and 280nm
• Photometric measuring range: 0.001 to 4.30 OD
• Method-dependent evaluation:
–Purity via 260/280nm ratio
–ssDNA via 260nm
–dsDNA via 260 nm
–RNA via 260 nm
–Protein via 280nm
• Computer interface: USB
• WxLxH: 3.5 x 7 x 3 inch

點我放大

AQ-07 Micro cuvette

• Cat#007ZZ001
• Micro cuvette with frosted walls and lid

點我放大

AQ-07 Ultra-Micro cuvette

• Cat#007ZZ002
• Target Volume is 8ul

點我放大

AQ-08 8-Channel Nucleic Acid Meter

• Cat#008AS001
• Wavelengths: 260 and 280nm
• Photometric measuring range:
0.001 to 4.00 OD
• Method-dependent evaluation:
–Purity via 260/280nm ratio
–ssDNA via 260nm
–dsDNA via 260 nm
–RNA via 260 nm
–Protein via 280nm

• WxLxH: 9.5 x 7.5 x 4.5 inch

點我放大

8 Channel sample vessel

• Cat#008ZZ001
• 8 samples at one time

點我放大

Upright Freezer

● Cat#Nr 6481
● Temp. range: -50 °C~-85 °C
● Capacity: 96L
● Inner dimensions(WxDxH):
430 x 430 x 510 mm
● Exterior dimensions(WxDxH)
900 x 770 x 890 mm

點我放大

Upright Freezer

● Cat#Nr 6483
● Temp. range: -50 °C~-85 °C
● Capacity: 300 L
● Inner dimensions(WxDxH):
600 x 450 x 1100 mm
● Exterior dimensions(WxDxH):
990 x 865 x 1940 mm

點我放大

Chest Freezer

● Cat#Nr 6380
● Temp. range: -50 °C~-85 °C
● Capacity: 70 L
● Inner dimensions(WxDxH):
600 x 350 x 340 mm
● Exterior dimensions(WxDxH):
836 x 685 x 1055 mm

點我放大

Shakers

● Cat#Nr 3005
● Shaking motion: orbital
● Platform: 330x330 mm
● Load capacity: max. 8 kgs
● Frequency:20~500 rpm
● Timer: up to 60 minutes or continuous operation
● Temperature: +10 °C~+50 °C
● WxDxH: 380 x 510 x 140 mm

點我放大

Shakers

● Cat#Nr 3006
● Shaking motion: reciprocating
● Platform: 330 x 330 mm
● Load capacity: max. 8 kgs
● Frequency: 20~300 rpm
● Timer: up to 60 minutes or continuous operation
● Temperature: +10 °C~+50 °C
● WxDxH: 380 x 510 x 140 mm

點我放大

Shakers

● Cat#Nr 3019
● Shaking motion: orbital
● Platform: 676 x 540 mm
● Load capacity: max. 30 kgs
● Frequency: 20~250 rpm
● Timer: up to 60 minutes or continuous operation
● Temperature: +10 °C~+50 °C
● WxDxH: 745 x 730 x 135 mm

點我放大

Shaking Water Baths

● Cat#Nr 1083
● Temp. range: 5 °C above RT~ +99.9 °C
● Capacity: 20L
● Shaking motion: reciprocating, with on/off switch
● Shaking frequency: 10~250 /min
● Inner dimensions(WxDxH):
450 x 300 x 160 mm
● Exterior dimensions(WxDxH)
715 x 520 x 330 mm

點我放大

Shaking Water Baths

● Cat#Thermolab  1070
● 4 independently heatable basins
● Temp. range: 5 °C above RT ~+99.9 °C
● Shaking motion: reciprocating, with on/off switch
● Shaking frequency: 2~50 /min
● Inner dimensions(WxDxH):
175 x 175 x 100 mm
● Exterior dimensions(WxDxH):
625 x 556 x 270 mm

點我放大

Shaking Water Baths

● Cat#Nr 1092
● Temp. range: 5 °C above RT ~+80 °C
● Tempe.range operation with cooling coil: +10 °C~+80 °C
● Shaking motion: orbital, with on/off switch
● Frequency: 10~250 /min
● Inner dimensions(WxDxH):
450 x 300 x 160 mm
● Exterior dimensions(WxDxH):
635 x 505 x 400 mm

點我放大

Water Baths

● Cat#Nr 1003
● Temp. range: 5 °C above RT ~+99.9 °C
● Capacity: 14L
● Inner dimensions(WxDxH):
400 x 245 x 145 mm
● Exterior dimensions(WxDxH)
485 x 440 x 255 mm

點我放大

Water Baths

● Cat#Nr 1005
● Temp. range: 5 °C above RT ~+99.9 °C
● Capacity: 40L
● Inner dimensions(WxDxH):
410 x 296 x 315 mm
● Exterior dimensions(WxDxH)
495 x 490 x 445 mm

點我放大

Water Baths

● Cat#Nr 1013
● Temp. range: 5 °C above RT ~+99.9 °C
● Capacity: 14L
● Inner dimensions(WxDxH):
400 x 245 x 145 mm
● Exterior dimensions(WxDxH)
485 x 440 x 255 mm

點我放大

water still

● Cat#Nr 2001/4
● Good distillate quality
● Capacity: 4L/h
● Conductivity: 2.3 μs/cm, 25 °C
● Cooling water required: 40L/h
● WxDxH: 280x 250 x 490 mm

點我放大

water stills

● Cat#Nr 2004
● Good distillate quality
● Capacity: 4L/h
● Conductivity: 2.3 μs/cm, 25 °C
● Storage tank capacity: 8L
● Cooling water required: 48L/h
● WxDxH: 620x 330 x 460 mm

點我放大

water stills

● Cat#Nr 2104
● Good distillate quality
● Single distillate conductivity:
2.3 μs/cm, 25 °C
● Double distillate conductivity:
2.3 μs/cm, 25 °C
● Capacity: 4L/h
● Cooling water required: 120L/h
● WxDxH: 550 x 280 x 570 mm

點我放大

Shaking Incubators

● Cat#Nr 4010
● Temp. range: 8 °C above RT ~+70 °C
● Shaking motion: orbital, switched on/off
● Timer: 1 min~999 h
● Inner dimensions(WxDxH):
450 x 450 x 280 mm
● Exterior dimensions(WxDxH)
525 x 665 x 570 mm

點我放大

Hybridisation Incubator

● Cat#Nr 7601
● Temp. range: 8 °C above RT ~+99.9 °C
● Rotations speed: 10/min., fix
● Inner dimensions(WxDxH):
400 x 330 x 380 mm
● Exterior dimensions(WxDxH)
585 x 630 x 650 mm

點我放大

Mini Tube Roller Incubator

● Cat#Nr 4020
● Temp. range: 8 °C above RT ~+60 °C
● Capacity: 12L
● Inner dimensions(WxDxH):
230 x 310 x 170 mm
● Exterior dimensions(WxDxH)
280 x 510 x 280 mm

點我放大

Polarimeter with Peltier Temperature control

● Cat#P8000-PT
● Automatic, digital, high accuracy and resolutiom
● Reliable, robust and easy to operate
● Resuces the measuring time to 1 second
● Measuring range: ±90°;
±259 °Z; 0~99.9 g/ml
● Range of temperature control: 15~40°C
● Measured data storage: 999
● Interfaces: RS-232/USB

點我放大

LEDManualLabPo

● Cat#P1000
● Simple, robust device
● For basic applications in the lab and for training.
● High-quality metal stand
● Sample chamber for tubes up to 220 mm
● Measuring range: 0~180°Z

點我放大

Automatic Polarimeter

● Cat#P8000
● Automatic, digital, high accuracy and resolutiom
● Reliable, robust and easy to operate
● Resuces the measuring time to 1 second
● Measuring range: ±90°;
±259 °Z; 0...99.9 g/ml
● Measured data storage: 999
● Interfaces: RS-232/USB

點我放大

Automatic Polarimeters

● Cat#P3000
● Automatic, digital, high accuracy and resolutiom
● Reliable, robust and easy to operate
● Resuces the measuring time to 1 second
● Measuring range: ±45°Z
● Measured data storage: 999
● Interfaces: RS-232/USB

點我放大

Automatic Sugar Polarimeters

● Cat#PS8000
● Automatic, digital, high accuracy and resolutiom
● Reliable, robust and easy to operate
● Resuces the measuring time to 1 second
● Measuring range:±250 °Z
● Measured data storage: 999
● Interfaces: RS-232/USB

點我放大

Digital Refractometers

● Cat#DR6000
● For measuring transparent or solid substances.
● Automatic temp. compensation is programmable.
● Resuces the measuring time to 4 second
● Temp. measuring range:
-40~120°C
● Measured data storage: 999
● Interfaces: RS-232/USB

點我放大

Digital Abbe Refractometer

● Cat#AR2008
● Suited for use in a harsh environment.
● With a glass calibration plate, contact fluid and a screwdriver
● Sugar scale: 0~95% Brix
● Temp. compensation: 0~99°C
● Temp. measuring range: 0~99 °C
● Measured data storage: 999
● Interfaces: RS-232/RS422

點我放大

Abbe Refractometers

● Cat#AR4
● Abbe refractometers are easy to use and only a small sample volume is required.
● They are well suited for all kinds of samples, no matter if solid, viscous or fluid.

點我放大

Abbe Refractometers

● Cat#AR4D
● Small sample volume
● All kinds of samples
● Measuring range: 1.3000~1.7000 nD; 0~95% Brix
● Temp. measuring range:
-40~120°C
● Measured data storage: 999
● WxLxH: 140 X 100 X 235 mm
● Weight: 4.4 kg

點我放大

Bypass Process Refractometer

● Cat#PRB21
● Continuous process monitoring.
● Measuring range: 1.3000~1.5600 nD; 0~95% Brix
● Temp. measuring range:
-10~99.9°C
● Measuring time: 3~60 s

點我放大

Process Refractometer

● Cat#PR21
● Ideal for process monitoring
● Simpler to install in a pipeline or tank
● Refractive index [nD], Sugar content [%Brix]
● Measurement time: 3–60 s
● Temp. measuring range:
-10~200 °C

點我放大

Digital Hand-held Refractometers

● Cat#DR301-95
● Measuring range: 1.3330~1.5318 nD
● Sugar scale: 0~95% Brix
● Temp. measuring range: 5~40°C
● Temp. compensation: 5~40°C
● WxLxH: 180 x 100 x 60 mm

點我放大

Digital Hand-held Refractometers

● Cat#DR201-95
● Measuring range: 1.3330~1.5318 nD
● Sugar scale: 0~95% Brix
● Temp. measuring range: 0~40°C
● Temp. compensation: 10~40°C
● WxLxH: 130 x 80 x 40 mm

點我放大

Digital Hand-held Refractometers

● Cat#DR101-60
● Waterproof case allows the DR101-60 to be rinsed under running water.
● Measuring range: 1.3330~1.4419 nD
● Sugar scale: 0~60% Brix
● Temp. measuring range: 0~40°C
● Temp. compensation: 10~40°C
● WxLxH: 110 x 62 x 32 mm

點我放大

Manual Hand-held Refractometers

● Cat#HR10
● Easy to use and very sturdy.
● Sugar scale: 0~10% Brix

點我放大

Manual Hand-held Refractometers

● Cat#HRKL-32
● Easy to use and very sturdy.
● Sugar scale: 0~32% Brix

點我放大

Manual Hand-held Refractometers

● Cat#HRT32
● Easy to use and very sturdy.
● Sugar scale: 0~32% Brix

點我放大

Manual Hand-held Refractometers

● Cat#HR25-800
● Easy to use and very sturdy.
● Sugar scale: 0~80% Brix

點我放大

Manual Hand-held Refractometers

● Cat#HR900
● Easy to use and very sturdy.
● Sugar scale: 0~80% Brix
● Temp. measuring range: 6~36 °C

點我放大

Gem Refractometers

● Cat#ER601
● Determination of the refractive index of gemstones.
● Measurement range: 1.30~1.81 nD
● With NA-filter and polarizing filter

點我放大

Gem Refractometers

● Cat#ER604
● Determination of the refractive index of gemstones
● Measurement range: 1.33~1.81 nD
● With NA-filter and polarizing filter

點我放大

Melting Point Meter

● Cat#KSP1N
● A fan cooling allows fast measurements in every range of temperature.
● Can be examined in capillaries.
● Measuring range: 30~360 °C
● Heat range: 1 °C/minute

點我放大

Melting-Point Meters

● Cat#KSP1D
● A fan cooling allows fast measurements in every range of temperature.
● Can be examined in capillaries.
● Measuring range: 30~360 °C
● Heat range: 1 °C/minute

點我放大

Melting-Point Meters

● Cat#M5000
● A fan cooling allows fast measurements in every range of temperature.
● Can be examined in capillaries.
● Measuring range: 25~400 °C
● Heat rate: 300 °C/4 minute; 400 °C / 7.5 min
● WxLxH: 230 x 210 x 110 mm
● Interfaces: RS-322

點我放大

Density Meter

● Cat#DS7800
● Density measure range: 0.00000 – 1.99999 g/cm³
● Sample volumn: 2 ml
● Sample temp.:10~40 °C
● Measuring time: 30~60 s
● Measured data storage: 999
● Interfaces: RS-232/USB

點我放大

Lionheart FX Automated Microscope

● Automated digital microscopy up to 100x
● Brightfield, color brightfield, phase contrast and fluorescence imaging
● Gen5 3.0 software: Image capture, annotation, analysis and movie maker
● Live cell assay support with environmental controls
● Compact design for quick installation and setup

點我放大

BioSpa Live Cell Imaging System

● Full unattended workflow automation or up to 8 plates or other labware
● Real time temperature and CO2/O2 control and monitoring, plus humidity monitoring
● Continuous recording of environment conditions and customized notifications
● Fluorescence, brightfield, color brightfield and phase contrast imaging modes
● Up to 60x magnification and up to 4 color channels covers a range of applications

點我放大

Cytation 5 Cell Imaging Multi-Mode Reader

● Imaging: fluorescence, brightfield, color brightfield and phase contrast
● Plate reading: fluorescence, FP, TRF, Alpha, luminescence, absorbance
● Variable bandwidth monochromator and filter-based fluorescence
● Monochromator UV-Vis absorbance
● Incubation to 65 °C
● Available CO2/O2 control
● Gen5 Microplate Reader and Imager Software

點我放大

Cytation 1 Cell Imaging Multi-Mode Reader

● Imaging: fluorescence and high contrast brightfield
● Plate reading: fluorescence, FP, TRF, luminescence, absorbance
● Monochromator UV-Vis absorbance, filter-based fluorescence
● Incubation to 45 °C
● Available CO2/O2 control
● Gen5 Microplate Reader and Imager Software

點我放大

Synergy Neo2 Hybrid Multi-Mode Reader

● Fluorescence, FP, TRF, Luminescence, UV-Vis absorbance
● Alpha laser option
● Dual PMT optics: fast ratiometric measurements
● Incubation to 65 °C
● Variable bandwith monochromator
● Ultra-fast plate stacker

點我放大

Cytation Hybrid Multi-Mode Reader

● Fluorescence, FP, TRF, luminescence, UV-Vis absorbance
● Alpha laser option
● Incubation up to 65 °C and CO2/ O2
● Variable bandwidth monochromator available

點我放大

Synergy H1 Hybrid Multi-Mode Reader

● Fluorescence, FP, TRF, luminescence, UV-Vis absorbance
● Incubation to 45 °C and CO2/O2 control
● Hybrid optics: sensitivity and flexibility

點我放大

Synergy 2 Multi-Mode Reader

● Plate reading: fluorescence, FP, TRF, Alpha, luminescence, absorbance
● High sensitivity filter-based fluorescence
● Flexible monochromator-based absorbance
● Incubation to 65 °C

點我放大

Synergy HTX Multi-Mode Reader

● Fluorescence, Alpha, luminescence, absorbance
● High sensitivity filter-based fluorescence
● Flexible monochromator-based absorbance
● Incubation to 50 °C

點我放大

PowerWave HT Microplate Spectrophotometer

● Fast 96 & 384-well measurents
● Small footprint: great for automation integration

點我放大

Epoch 2 Microplate Spectrophotometer

● 6- to 384-well plates
● 2 µL sample measurements with Take3 plates
● Touchscreen interface with full Gen5 software onboard
● Incubation to 65 °C, linear and orbital shaking
● Cuvette port option

點我放大

Epoch Microplate Spectrophotometer

● 6- to 384-well plate compatibility
● 2 µL sample measurements with optimal Take3 plates
● Economical UV-Vis measurements

點我放大

ELx808 Absorbance Reader

● Fast 96-well plate reading
● Superior incubation & shaking
● Endpoint and kinetic assays

點我放大

800 TS Absorbance Reader

● 6- to 96-well reading
● 6- to 384-well reading option
● 400 nm to 750 nm wavelength range
● 340 nm to 750 nm wavelength range option
● Color touchscreen interface
● Incubation and shaking option

點我放大

EL406 Washer Dispenser

● 96- to 1536-well plates
● Fast full-plate microplate washing
● Up to 3 reagent dispensers
● Modular and upgradable

點我放大

MultiFlo FX Multi-Mode Dispenser

● 6- to 1536-well plate washing option
● 6- to 384-well plate dispensing
● Single channel RAD dispense to individual wells
● Modular and upgradable

點我放大

405 TS Washer

● 96-, 384- and 96-/384-well microplate washing configurations
● Cell-based assay optimized configurations available
● Biomagnetic and vacuum filtration separation capable
● Color touchscreen and extensive onboard software
● Available patented Ultrasonic Advantage™ and Verify™
● LHC2 pc software available for computer control and automation integration

點我放大

405 LS Washer

● 6 & 384-well plate washing
● Automation compatible
● Programmable onboard software

點我放大

ELx405 Select Deep Well Washer

● 96- and 384-well deep well and standard height plate washing
● Patented Dual-Action manifold
● Biomagnetic separation capable

點我放大

50 TS Washer

● #1 microplate washer brand
● Applications from ELISA to cell based assays
● Easy touchscreen programming
● Simple operation
● Liquid level sensing: safe & reliable
● Convenient auto buffer switching
● Built-in maintenance routines

點我放大

MicroFill Dispenser

● 24-, 96- and 384-well dispensing
● Economical, high performance syringe pump dispenser
● Low maintance, robust performance
● Dispense from 5 to 6,000 µL per well

點我放大

Precision Pipetting System

● 96- and 384-well plate and tube pipetting and dispensing
● Personal pipetting workstation
● Bulk reagent and single channel pipetting and dispensing
● Pipette to 6- to 384-well plates with Precision XS
● Serial dilutions, plate to plate transfers