儀器產品列表
點我放大
CoolSystem M90
• Cat#BCS-117
• Includes ThermalTray LP, CoolRack M90
• Maintain low temp. up to 12h
• 90 x 1.5 ml eppendorf
• WxLxH: 33 x 40.6 x 12.4 cm
• Weight: 5.1 kg
點我放大
CoolSystem M30x3
• Cat#BCS-118
• Includes ThermalTray LP, CoolRack M30
• Maintain low temp. up to 12h
• 90 x 1.5 ml eppendorf
• WxLxH: 33 x 40.6 x 12.4 cm
• Weight: 5.1 kg
點我放大
CoolSystem CF45
• Cat#BCS-119
• Includes ThermalTray LP, CoolRack CF45
• Maintain low temp. up to 12h
• 45 x flow tube
• WxLxH: 33 x 40.6 x 12.4 cm
• Weight: 3.8 kg
點我放大
CoolSystem PCR96(1)
• Cat#BCS-121
• Includes ThermalTray LP, CoolRack PCR96
• Maintain low temp. up to 12h
• 96 plate
• WxLxH: 33 x 40.6 x 12.4 cm
• Weight: 2.9 kg
點我放大
CoolSystem PCR96(3)
• Cat#BCS-122
• Includes ThermalTray LP, CoolRack PCR96
• Maintain low temp. up to 12h
• 3 x 96 plate
• WxLxH: 33 x 40.6 x 12.4 cm
• Weight: 3.8 kg
點我放大
CoolSystem™ CRYO
• Cat#BCS-142
• Includes CoolCell -12vial, CFT30 CoolBox System
• Maintain low temp. up to 10h
• Diam x H : 11.7 x 10.9 cm
• WxLxH: 16.5 x 15.3 x 12.7 cm
• Weight: 4.3 kg
點我放大
CoolBox™ XT CryoTube 15 Workstation
Complete ice-less cooling station to maintain samples at 0.5 to 4℃ for over 16 hours without power. Includes CoolBox XT system, CoolRack CF15 to hold 15 cryovials and one pack of 50 TruCool™ 2ml cryogenic tubes
點我放大
Protein / Nucleic Acid Handling CoolSystem
BCS-240
Uniform temperature control for tubes and plates during Protein / Nucleic Acid procedures. Eliminate temperature variability and ensure highly reproducible results through standardization of procedures typically performed in ice, dry ice, water baths and other passive temperature sources.
Precision-engineered thermo-conductive modules provide consistent and uniform temperature control through direct contact with ice, dry ice, liquid nitrogen, waterbath, hot plate or other temperature source. Ideal for cooling, (snap)freezing,incubating, thawing. Minimizes variability, user error and contamination.
Kit Includes:
CoolRack M30-PF:-Thermo-conductive CoolRack for up to 30 1.5ml conical microcentrifuge tubes.
CoolSink 96F - Thermo-conductive CoolSink plate holder for one 96-well flat-bottom plate. Provides a stable base for plate and eliminates "edge effect" and other well-to-well variability.
ThermalTray LP - Solid, stable platform to support the CoolRack and CoolSink modules in liquid temperature sources, such as melted ice. Allows over 12 hours 0-4°C cooling with one pan of ice.
Maxi 9L Ice Bucket - Unbreakable, insulative container for ice, dry ice, liquid nitrogen.
點我放大
Protein / Nucleic Acid CoolSystem Ice-Free
BCS-241
Uniform, ice-free temperature control for tubes and plates during Protein / Nucleic Acid procedures. Eliminate temperature variability and ensure highly reproducible results through standardization of procedures typically performed in ice, dry ice, water baths and other passive temperature sources.
Precision-engineered thermo-conductive modules provide consistent and uniform temperature control through direct contact with ice, dry ice, liquid nitrogen, waterbath, hot plate or other temperature source. Ideal for cooling, (snap)freezing, incubating, thawing. Minimizes variability, user error and contamination.
Kit Includes:
CoolBox M30-PF - Ice-free cooling/freezing container for 30 1.5ml conical microcentrifuge tubes.
CoolBox 96F - Ice-free cooling/freezing container for 96-well flat-bottom plate.
點我放大
Microbiology CoolSystem
BCS-242
Complete microbiology handling kit for benchtop cooling, freezing or warming with less variability, handling error and contamination. Maintain a less crowded environment in a biosafety laminar flow hood for work in BSL-2/ BSL-3 or at the bench. Easy decontamination through bleaching, autoclaving, or using iodine based products.
Precision-engineered thermo-conductive modules provide consistent and uniform temperature control through direct contact with ice, dry ice, liquid nitrogen, waterbath, hot plate or other temperature source. Ideal for cooling, (snap)freezing,incubating, thawing. Minimizes variability, user error and contamination.
Kit Includes:
CoolRack CFT30 - Thermo-conductive CoolRack for 30 cryo vials. "Gripping" well design enables one-hand vial ing/closing. Ideal for cold and hot incubations, snap-freezing microorganisms for storage in dry ice (ethanol-free) to avoid loss of titre.
CoolSink BX50 - thermo-conductive reagent reservoir holder for Biotix BioX-resin 50ml reservoirs. Keeps virus preparations cold on a solid base while dispensing to plates for virus infection. Can also be used for cell dispensing into plates.
CoolSink 48 - Thermo-conductive CoolSink plate holder for one 6-, 12-, 24- or 48-well plate. Keeps platecold for viral infections, compound addition, incubations or any other assay.
點我放大
PCR Prep (Ice-Free) CoolSystem ™
BCS-243
ice-free PCR preparation kit. Stable workstation and uniform temperature control for 200ul tubes, plates and strips. Maintains your samples, buffers and enzymes at <4 °C in an orderly manner as you prepare any reaction: RT-PCR, q-PCR, or endpoint PCR. Eliminates temperature variability, minimizes the risk of contamination and ensures highly reproducible results through temperature standardization of procedures typically performed in ice. Kit Includes: CoolBox PCR96 - Ice-free cooling container and thermo-conductive module for 96-well 0.2ml PCR plates/tubes/strips. Keeps all wells at uniform temperature (0.5°C to 4.0°C) for up to 10 hours. CoolRack M15 - Ice-free cooling container and thermo-conductive module for 96-well 0.2ml PCR plates/tubes/strips. Keeps all wells at uniform temperature (0.5°C to 4.0°C) for up to 10 hours. Mini 1L ice pan - Unbreakable, insulative ice container to keep CoolRack M15 cold on ice.
點我放大
Tissue Dissection CoolSystem
BCS-245
Complete tissue dissection kit for keeping tissues moist and fresh while dissecting on the bench top. Avoids tissue drying and desiccation during sectioning. Accumulate samples and process later. CoolMat is thin enough to readily transmit heat to the ThermalTray and keep samples at temperature of cooling source (ice, dry ice, etc), yet thick enough to protect scalpel and ThermalTray for repeated use. Remains flexible under freezing conditions. ThermalTray is made of novel thermo-conductive material that rapidly equilibrates to temperature sources such as ice, dry ice, liquid nitrogen, water baths. Kit includes: CoolMat - Mat for histological preparation on cold ThermalTray surface. Protects scalpel blade from rapid dulling and ThermalTray surface from cosmetic abrasions. ThermalTray LP - Solid, stable thermo-conductive platform that equilibrates within 90 seconds on ice to <4°C and becomes an ideal dissecting station. Provides over 12 hours 0-4°C cooling with one pan of ice. Maxi 9L Ice Bucket - Unbreakable, insulative container for ice, dry ice or liquid nitrogen.