儀器產品列表

點我放大

CoolSink 48

• Cat#BCS-101
• 6-, 12-, 24-, 48-well plate
• WxLxH: 13.2 x 8.9 x 1.8 cm
• Weight: 0.8 kg

點我放大

CoolSink 96F

• Cat#BCS-106
• 96 well flat-bottom plates
• WxLxH: 13.2 x 8.9 x 1.8 cm
• Weight: 0.8 kg

點我放大

CoolSink 96U

• Cat#BCS-107
• 96 well round-bottom plates
• WxLxH: 13.2 x 8.9 x 1.8 cm
• Weight: 0.8 kg

點我放大

CoolSink™ BX50

Cat#BCS-180

CoolSink™ BX50
Thermo-conductive reagent reservoir holder for Biotix's BioX-Resin™ biodegradable 50ml reagent reservoirs.

點我放大

CoolSink™ BX100

Cat#BCS-183

CoolSink BX100 is a thermo-conductive reagent reservoir holder for Biotix's BioX-Resin™ biodegradable 100ml reagent reservoirs

點我放大

CoolSink™ XT 96F (AF)

BCS-536

CoolSink XT 96F is a thermo-conductive plate holder for 96-well flat-bottom plate. It maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other temperature sources. Or, keep samples cold or frozen in ice-free CoolBox XT or 2XT Systems and Workstations where samples stay cold without ice or electricity for over 16 hours, and frozen for over 10 hours.

SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.


Keeps all samples at uniform temperature while instantly organizing and protecting them.

點我放大

CoolSink™ XT 96U (AF)

BCS-537

CoolSink XT 96U is a thermo-conductive plate holder for one 96-well u-bottom plate that is compatible with standard automation equipment. It maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other temperature sources. Or, keep samples cold or frozen in ice-free CoolBox XT or 2XT Systems and Workstations where samples stay cold without ice or electricity for over 16 hours, and frozen for over 10 hours.

SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.

點我放大

CoolSink™ H

BCS-312

oolSink H is a thermo-conductive platform for a wide variety of histological applications. When placed on ice or dry ice it will rapidly equilibrate to the source temperature and provide a cold, flat and stable platform for applications including:

• tissue dissections

• rapid collection and freezing of tissue samples

• tissue OCT embedment and frozen slide sorting

CoolSink H is the ideal platform to use when it is necessary to preserve and maintain tissue structure, and/or the RNA and protein integrity of frozen tissues embedded in OCT prior to the preparation of frozen sections. It provides a more uniform and convenient method of freezing tissue samples than simply placing samples on dry ice, and it eliminates the need for organic ice bath slurries which require special handling and disposal procedures. The use of Coolsink H can improve the workflow of tissue and sample collection when a large number of samples are collected in a rapid and organized manner, such as is done in drug response studies, pharmacokinetic studies, and toxicological studies.

Diemesion :
10.2" x 20.3" x 1.3 cm. (W x L x H)

點我放大

CoolSink™ HL

BCS-313

CoolSink HL is a thermo-conductive platform for a wide variety of histological applications. When placed on ice or dry ice it will rapidly equilibrate to the source temperature and provide a cold, flat and stable platform for applications including:

• tissue dissections
• rapid collection and freezing of tissue samples
• tissue OCT embedment and frozen slide sorting

CoolSink HL is the ideal platform to use when it is necessary to preserve and maintain tissue structure, and/or the RNA and protein integrity of frozen tissues embedded in OCT prior to the preparation of frozen sections. It provides a more uniform and convenient method of freezing tissue samples than simply placing samples on dry ice, and it eliminates the need for organic ice bath slurries which require special handling and disposal procedures. The use of Coolsink HL can improve the workflow of tissue and sample collection when a large number of samples are collected in a rapid and organized manner, such as is done in drug response studies, pharmacokinetic studies, and toxicological studies.

Dimensions:：20.3 x 27.9 x 1.3 cm. (W x L x H)

點我放大

CoolSink™ HS

BCS-315

CoolSink HS flat slide sorter is a novel tool that enables one to hold, organize, and incubate microscope slide samples in various types of environments. CoolSink HS flat slide sorter is designed to be placed on ice, dry ice, warming plate or incubator for standardized and temperature-controlled incubations and staining, and in situ hybridization. CoolSink HS provides a uniform and secure platform for slide processing. Carved reservoir enables incubation with solutions, if needed.

Dimensions:
14.0 x 32.3 x 1.3 cm. (W x L x H)

點我放大

CoolSink™ HST

BCS-314

CoolSink HST vertical slide sorter ensures cryoslides remain frozen and organized while working on the cryotome. The reduced temperature is essential for both preserving antigenic sites as well as RNA quality.

Frozen tissue sections can preserve the antigenic sites or the enzyme activity of ed targets that are lost with chemical fixation. Additionally, if tissues are to be used for laser capture microdissection (LCM), RNA quality must be preserved by maintaining reduced temperatures in a RNase free environment. The CoolSink HST vertical slide holder offers a convenient and reliable tool to ensure that frozen sections are maintained at reduced temperatures in a format that allows for multiple sections to be processed at one time. Slide labels are easily viewed while slides are in this vertical position.

Place CoolSink HST on dry ice in BioCision’s midi 4L ice pan or directly on the cryotome. Convenient handles provide easy transport and temperature management of 10 slides at a time.

CoolSink HST can be autoclaved or high-heat sterilized with the handles removed, or decontaminated with bleach, alcohol solutions, or RNase inactivating solutions. Holds 10 slides

點我放大

CoolSink™ HCD

BCS-311
CoolSink HCD thermo-conductive culture dish platform is designed to stabilize and equalize the temperature of Corning culture dishes. The module features recesses to accept the ring stand-off on the underside of the dishes, enabling maximal thermal contact between the CoolSink top surface and the underside of the dish.

For tissue processing, the CoolSink HCD series allows tissue samples to be processed in a sterile culture dish while the dish is stabilized and at the desired temperature in a biosafety cabinet. When tissues are dissociated, as in the case of stem cell isolation, or “cancer stem cell” isolation, or for FACS analysis, they require a combination of mechanical and enzymatic treatments to digest to single cells. The CoolSink HCD series provides the support, the thermal contact for temperature regulation, and the ability to easily manipulate the tissue in a biosafety cabinet.

Use for a variety of other applications including warm or cold incubations for cell harvesting or lysis, rapid agar solidification for growth independence, solutions or media incubations. CoolSink HCD is necessary when samples must be kept sterile and when cell viability is important during processing.

The locking recesses permit the user to manipulate both hands when processing tissue or cellular samples. Place on ice, dry ice or other cold or warm sources and CoolSink HCD will rapidly adapt to source temperature. Rubber feet allow for placement in a biosafety cabinet for stable manipulation, but are removable if placing on a ThermalTray™ for water bath incubations or when autoclaving.

Accommodates Corning brand 35mm, 60mm, 100mm and 150mm culture dishes. Autoclavable, high heat sterilizable and compatible with bleach, alcohol and common laboratory detergents.

Dimensions:
6.25 x 6.25 x 0.35 in. (W x L x H)
15.9 x 15.9 x 0.9 cm. (W x L x H)

點我放大

CoolSink™ HCD2

BCS-310
CoolSink HCD2 thermo-conductive culture dish platform is designed to stabilize and equalize the temperature of Corning culture dishes. The module features recesses to accept the ring stand-off on the underside of the dishes, enabling maximal thermal contact between the CoolSink top surface and the underside of the dish.

For tissue processing, the CoolSink HCD series allows tissue samples to be processed in a sterile culture dish while the dish is stabilized and at the desired temperature in a biosafety cabinet. When tissues are dissociated, as in the case of stem cell isolation, or “cancer stem cell” isolation, or for FACS analysis, they require a combination of mechanical and enzymatic treatments to digest to single cells. The CoolSink HCD series provides the support, the thermal contact for temperature regulation, and the ability to easily manipulate the tissue in a biosafety cabinet.

Use for a variety of other applications including warm or cold incubations for cell harvesting or lysis, rapid agar solidification for growth independence, solutions or media incubations. CoolSink HCD2 is necessary when samples must be kept sterile and when cell viability is important during processing.

The locking recesses permit the user to manipulate both hands when processing tissue or cellular samples. Place on ice, dry ice or other cold or warm sources and CoolSink HCD2 will rapidly adapt to source temperature. Rubber feet allow for placement in a biosafety cabinet for stable manipulation, but are removable if placing on a ThermalTray™ for water bath incubations or when autoclaving.

Accommodates Corning brand 35mm, 60mm and 100mm culture dishes. Autoclavable, high heat sterilizable and compatible with bleach, alcohol and common laboratory detergents.


Dimensions:
4.5 x 4.5 x 0.35 in. (W x L x H)
11.4 x 11.4 x 0.9 cm. (W x L x H)

點我放大

CoolSink™ HCD3

BCS-316
CoolSink HCD3 thermo-conductive culture dish platform is designed to stabilize and equalize the temperature of Corning culture dishes. The module features recesses to accept the ring stand-off on the underside of the dishes, enabling maximal thermal contact between the CoolSink top surface and the underside of the dish.

For tissue processing, the CoolSink HCD series allows tissue samples to be processed in a sterile culture dish while the dish is stabilized and at the desired temperature in a biosafety cabinet. When tissues are dissociated, as in the case of stem cell isolation, or “cancer stem cell” isolation, or for FACS analysis, they require a combination of mechanical and enzymatic treatments to digest to single cells. The CoolSink HCD series provides the support, the thermal contact for temperature regulation, and the ability to easily manipulate the tissue in a biosafety cabinet.

Use for a variety of other applications including warm or cold incubations for cell harvesting or lysis, rapid agar solidification for growth independence, solutions or media incubations. CoolSink HCD3 is necessary when samples must be kept sterile and when cell viability is important during processing.

The locking recesses permit the user to manipulate both hands when processing tissue or cellular samples. Place on ice, dry ice or other cold or warm sources and CoolSink HCD3 will rapidly adapt to source temperature. Rubber feet allow for placement in a biosafety cabinet for stable manipulation, but are removable if placing on a ThermalTray™ for water bath incubations or when autoclaving.

Accommodates Corning brand 100mm culture dishes with lid on. Autoclavable, high heat sterilizable and compatible with bleach, alcohol and common laboratory detergents.

Corning brand is a registered trademark of Corning, Incorporated.
Dimensions:
4.5 x 4.5 x 0.35 in. (W x L x H)
11.4 x 11.4 x 0.9 cm. (W x L x H)

點我放大

HistoMailer™

BCS-300
HistoMailer provides safe shipping of up to four histology embedded biopsy cassettes. The secure postion of each cassette prevents cassettes from ing and cross-contamination during shipping. Each sample can be labeled and clearly identified at all times, minimizing mis-identification or sample mix-ups. Organized shipping of samples can be done at room temperature or col (on ice or dry ice).

Made of eco-friendly recycled PET material, HistoMailer can also be used for long term storage.

點我放大

HistoMailer

BCS-301
HistoMailer provides safe shipping of up to four histology embedded biopsy cassettes. The secure postion of each cassette prevents cassettes from ing and cross-contamination during shipping. Each sample can be labeled and clearly identified at all times, minimizing mis-identification or sample mix-ups. Organized shipping of samples can be done at room temperature or col (on ice or dry ice).

Made of eco-friendly recycled PET material, HistoMailer can also be used for long term storage.

點我放大

CoolMat™

BCS-141
Polyethylene mat for histological preparation on a cold surface. The CoolMat is thin enough to readily transmit heat to the ThermalTray (not included), thick enough to protect scalpel and ThermalTray for repeated use, and remains flexible under freezing conditions.
4pc/pk
27.7 x 13.7 cm. (W x L)

點我放大

CoolMat™ H

BCS-302
CoolMat H is a polyethylene protective cover for CoolSink H during histological preparations. Contoured to fit around the CoolSink H handles precisely and cover entire top surface. CoolMat H is thin enough to not inhibit thermal contact between the cold CoolSink surface and the sample, and thick enough to protect scalpel blade and CoolSink surface during dissecting. Can be cleaned with bleach or alcohol for repeated use. Remains flexible under freezing conditions.

qty:4
10.2 x 20.3 cm. (W x L)

點我放大

CoolMat™ HL

BCS-303

CoolMat HL is a polyethylene protective cover for CoolSink HL during histological preparations. Contoured to fit around the CoolSink HL handles precisely and cover entire top surface. CoolMat HL is thin enough to not inhibit thermal contact between the cold CoolSink surface and the sample, and thick enough to protect scalpel blade and CoolSink surface during dissecting. Can be cleaned with bleach or alcohol for repeated use. Remains flexible under freezing conditions.

qty:4
20.3 x 27.9 cm. (W*L)